Multiplex Funjet EDF - typhoon 2w-20
Loading...
Uploader Comments (Vigaloz)
All Comments (16)
-
What brand and type of paint did you use and how well did it hold up? I want to paint my funjet so I can see it better but I am worried about the paint cracking or flaking off over time.
-
Cut the foam more in front and under the funjet so the duct can get air from both sides, that will significantly increase your power.
-
another wimpy hand launch
-
If i may make a suggestion, it may help you a lot if you thinned out the foam in front of the edf. From what it looks like, you do not have a great ducting setup, and a lot of the lower half of the edf is not exposed to airflow, making it useless.
-
how many watts?
-
In my opinion, EDF prevent potential prop striking the hand during a launch or breaking a prop on landing.Anyway, speed wise is quite fast. Good work.
-
programa certo o timing do seu esc para ñ dar essa enroscada na partida
FLW
2:26
Fun Jet Ultra , EDF with LED afterburnerby salem42salem424,563 views- 4:36
Funjet Ultra + EDF Typhoon 6s1p - Modelpegasoby freestyleAurelio6,813 views
- 1:36
100% carbon fiber Funjetby b1bman38,272 views
- 3:32
multiplex fun jet ultra multiplex the setup and test vidby poerik3,021 views
- 1:01
Multiplex Funjet Ultra Launchby bigdave89076,159 views
- 0:31
Funjet trick + Start !!!by ElectronikFreak18,096 views
- 0:11
EPO Parkjet + Turnigy H2218-3550kv +APC 4.74x4.75by kevinv03311,208 views
- 27 videos123EDFFEDS
- 3:03
Mulitplex Funjet - Maiden Flightby pianoman21057612,767 views
- 4:20
Challenge to all Stryker pilots! Send video responses of inverted harrier with Parkzone F27by warderseeker24,289 views
- 1:03
Wicked fast Demon F5D pylonracer (300 km/h)by RcAndries66,702 views
- 4:08
Funjet with Kolibri turbineby FVP2MACAM14,528 views
- 0:22
RC Multiplex FunJet 4S2200 Brushless 7100U/V fastby thomgti41,551 views
- 3:19
Multiplex Funjet on 5s 145-155 mphby rolexcomex18,474 views
- 1:30
HobbyKing Daily - Mercury Alloy EDF Unitby HobbykingLive20,152 views
- 3:42
Multiplex FunJet — Maiden and 2nd Flightby studioti3,558 views
- 1:17
funjet 90mm edfby lin350gg2,250 views
- 5:38
Custom Design FunJetby chippedprop496,590 views
- 5:03
Falcon 120 Maiden Flight "EDF Rc Jet"by billyd444445,866 views
- 4:16
Funjet Multiplex +EDF Thypoon- Pilota Andrea Covinoby freestyleAurelio5,858 views
I used fluorescent spray paint, these kind ( fuorescent , any ) of paint do not melt the multiplex elapor
Vigaloz 5 months ago
I´m totaly agree with you. Tks.
Vigaloz 1 year ago
seems slower than the usual push-prop.
May I ask why you decided to chose an EDF?
thestrugglewithin 1 year ago
Woow its a good question, i realy was tired to change props, or sofering on the bads takeoffs, this one have a gentle take off and the velocity is not to bad and the sound of duct fan like a litle jet. tks for comments.
Vigaloz 1 year ago
@Vigaloz
Was the transition/mounting process difficult?
After much thought, I'm considering using an EDF for my future funjet.
thestrugglewithin 1 year ago
No its not, but you have to cut out some peaces in the back of fujet, and insert carbon tubes on the base to suport duct, i use aluminium one, but carbon is bether then this. Other thing is respect the CG, wathever the final weigh. OH be carefull with angle of inclination of duct, its have to be = fuselage
Vigaloz 1 year ago