Disassembling, cleaning, and reassembling a Ruger 10/22 Mag
Loading...
Link to this comment:
Uploader Comments (heypete1)
Top Comments
-
Thank you, very nice video. I wasn't sure how to adjust the spring for tension.
The music is much better than the "rock" on many videos. Nice job.
2 years ago 8
All Comments (180)
-
11 people must like dirty malfunctioning guns
-
@GCatalan702 This likely from someone deafened by pounding rock music. Obviously at least coarsened in manners by it.
HeyPete, I've come back to review this video several times these past few years when I clean clips. It's extremely well done--precise, informative, lucid. THanks for the effort.
-
@JerryCphoto i had to watch it again and smack myself for thinking it was 8 full turns.
-
The background music is fucking annoying and makes it hard to hear you!
-
@blaziankhmer 8 "notches" for the 6 sided nut that is 1 & 1/3 turns
-
big praise to you fella, just purchased a secondhand ruger, it fired CCI subsonics without any jams, but the mag jammed couple times, watched your video and took mine apart, the insides were swimming in oil,grit and small piece of wood!! anyway, all clean,dry and works and feels like a new item
-
Great video thanks.
-
I needed this information to clean several filthy 10/22 magazines.
THANK YOU VERY MUCH!!!
-
Dude, this video is awesome. Thank you so much for sharing this. The instrumental music kicks ass
-
thanks for this video
- 9:30Ruger 10/22 Field Strip and Reassembly By Stayi...by StayingFr0sty2,595 views
- 9:46Ruger 10/22 Dissasembly, cleaning, and reasembl...by outdoorguy121531,995 views
- 5:41Walmart ruger 10/22by bctruck40,175 views
- 4:47Ruger BX-25 Magazine for 10/22 Riflesby tnoutdoors928,296 views
- 2:4810/22 Trick Tips # 2 Mag Couplerby shoktroop7,778 views
- 4:17How to make a homemade silencer / suppressor 槍-滅音器by zacklim4120591,341,001 views
- 10:00How To Disassemble , Clean & Break-in a Ruger 1...by kickedintheballs200051,356 views
- 2:53Test Firing the ArchAngel 10/22 Rifle Systemby TheChaves11b121,534 views
24 videos
- 4:26Ruger 10/22 Build ( Part 2 )by kickedintheballs200050,335 views
- 6:11Ruger 10/22 hammer installationby BodybuildingMike16,604 views
- 2:26Ruger Mark III .22 Pistol Disassemblyby RugerFirearms159,077 views
- 6:47How to disassemble a Ruger 10/22by DrTacTiC00L10,222 views
- 2:31How To Perform Rifle Barrel Break In (Part 1)by scheelsadmin45,873 views
- 3:03Ruger 10/22 180 yards shooting bottlesby ramseyrye68,589 views
- 3:36Glass Bedding the Ruger 10/22 rifle, improving ...by TheWorks1022179,045 views
- 6:41Ruger 10/22 Magazine Options and Reviewby AngryGunNerd9,931 views
- 3:18Ruger 10/22 Rifle Cleaningby RugerFirearms92,778 views
- 2:24Ruger 10/22 Rifle Disassemblyby RugerFirearms89,907 views
- 1:1910/22 SBR with silencerby elitearbor1,231,480 views
twist it 8 times? i can only do it about 4 1/2. now it won't slip out when i hit the release unless i pull it out or it is load making it heavier so it would drop out.
blaziankhmer 8 months ago
@blaziankhmer Eight notches (there are six notches in one full revolution), not eight full revolutions.
heypete1 8 months ago
helpful video...ever consider doing a video on cleaning the 10 22 WITHOUT disassembling, as all the others are.
jimmbo13 9 months ago
@jimmbo13 Disassembling the rifle itself is simplicity itself: remove one screw, push two pins to remove the trigger group, and then the bolt and spring come out with no tools. .22LR tends to be really dirty, so disassembling the rifle to clean it makes sense.
heypete1 8 months ago
This guy is blessed with a Golden Radio Voice...lol
dvr4fun 1 year ago 3
@dvr4fun Thanks. I actually used to do radio several years ago, but it's been a long time. I appreciate the kind words.
heypete1 10 months ago 4