Build an Infrared Pen for the Wiimote Interactive Whiteboard
Loading...
Uploader Comments (tisapache)
All Comments (9)
-
but how do you connect it to the battary? what do you connect the springs o?
-
is this patented?
-
I would double check the polarity of your LED. The LED is a diode. It will only work if it is connected correctly, positive to positive and negative to the negative side of the battery. In fact if too much voltage is hooked up in the wrong directly it might blow, and ruin your LED.
-
want more information on infraredpens
infraredpens
.
com
-
2. Placement of the Wii remote in relationship to the IR source. (The infrared light source must be visible to the lens of the Wii remote. Like testing the LED with your digital camera, if you cannot see the LED through the view finder, you cannot see if the LED is on. My experience shows that aiming the Wii remote from above and slightly away from the side I stand works best. If your Wii remote is too far or too close to the projection area it does not respond very well.)
-
The LED appears to be correct. Be sure to test the operation of the LED with a digital camera. If you see LED turn on/off, here are the issues I have seen others experience.
1. Blue tooth sync problems with the Wii remote.
(Not all bluetooth devices work with the software. Try both java and c# versions and a lot of patience.)
5:00
How to Create an IR Pen for the WiiMote Whiteboardby carolmorganschool5,804 views- 2:52
Build an IR Penby AustinOO35,901 views
- 2:29
How to make an IR Penby SubversiveICT19,594 views
- 9:18
How To Make your Own Interactive Whiteboardby ilovechefwilliam30,342 views
- 2:35
Secret Wiimote LED trick Revealed !!!by Simisful35,809 views
- 1:22
how to make your computer a touch screen the easy wayby MrStupidboys10152,536 views
- 4:58
Tutorial: How to Set Up Wiimote for use as PC Cursorby LemonProductions099,488 views
- 6:56
How to build your own Wii in 10 minutesby WiiBuilder680,728 views
- 2:13
How to see through clothingby WilliamRayWalters27,621,289 views
- 3:53
Rechargeable IR-Pen for Wiimote Interactive Whiteboardby benpaddlejones11,345 views
- 1:03
Home made Wii sensor bar for your laptopby VincentFunk10,887 views
- 2:42
Wiimote Smooth Board 0.1 - Demonstrationby GohBoonJin23,429 views
- 10:06
Wiimote Infrared Light Pen Tutorialby sperryfam23,745 views
- 1:03
SketchyWiisics 3D with Wiimote Whiteboardby danisla839,923 views
- 4:21
Wiimote Tableby whilzen17,660 views
- 3:56
Tip Activated Infrared IR Pen for the Wiimote Whiteboardby TeachingTechnology3,982 views
- 1:29
How to Make a Touch Screenby tinkeringteck77,000 views
- 2:24
IR PEN for wiimoteby ay10667,691 views
- 2:11
Nib Switch - Wiimote Project Infrared Penby Diddy11014,765 views
hi what is the use of wiimote please explain it for me thanksss
20bogart 1 year ago
Do a Google search for Johnny Chung Lee to see what motivated me to build the pen.
tisapache 1 year ago
Do a Google search for Johnny Chung Lee to see what motivated me to build the pen. The comments section here would not permit me to provide you with the URL.
tisapache 1 year ago
how do you power it? I use 2 AA but it doesnt give off enough IR light to reflect back to the wii mote. do you think my IR led is the problem?
davidjeffers28227 2 years ago
The pen as I have built it only uses a single AA battery. If you apply more than 1.5 v to the pen as it is shown in this video, you will need to place a resistor in the circuit. See the Johnny Lee web site for specifics about resistors.
tisapache 2 years ago