Brothers creek EPIC run! RC Jetboating!
Uploader Comments (4mods)
All Comments (53)
-
@stilllookin You should waterproof it. Get some silicone conformal coating and spray the board, keep your pins covered or the spray will be impossible to get off. Then what I do to really make sure is put in some shoe goo into the box as I close it sealing it up even more. I haven't had a blown rx in quite sometime. I have a video on it.
-
@4mods yeah it is... for these, lol..... not so good for carbon fiber prop hulls on 6s, :P
"apparently" these 2600kv 20/40's can take 4s, lol... ill try it when i stop drowning receivers :(
-
@4mods of course man yeah i dill the stock brass one out if needed .i work it out i am
sure . thanks
-
@450hp202turbo If you have a lathe or steady hand you can drill out most couplers. Or you can find those adapters as well like you mentioned.
-
@4mods OK yeah the 3060kv water cooled hobbywing on looks the go with 70amp esc. cheers man ,5mm shaft though ,need to set it down with some kind of adapter. ??
-
@450hp202turbo That combo did me well for a long time but there is more efficiant ones out there now man. Look into the hobby king gear, its cheap... works great and its cheap! They have all the watercooled stuff you need.
-
i got one of there suckers coming about time hay , well now you can purchase complete jets and props to easy to keep them running now, and yeah bigger after market jets are cheap as well
thinking the traxxas 1/16 vxl combo
-
@stilllookin That is awesome man, thanks! Your pool looks killer for testing! I run mostly 3 cell packs in my jet boats along with 4 cell in some cases! hahaha
how do you make it so water does not get in the boat from the hatch nice vid!
yo90bosses 2 months ago
@yo90bosses In the years I have ran these boats I have yet been able to seal one up. LOL!!!!
SO I make the hole a bit bigger where the stock antenna used to come out so I can easily drain my boat of its water. Most of us do this.
4mods 2 months ago