Cold Electricity - Dr.Stiffler (Variation)
Loading...
Loading...
6,385
Link to this comment:
Share to:
Uploader Comments (plengo)
see all
All Comments (11)
-
Video is so jerky that it's hard to follow (no it's not my high speed connection).
One thing that people don't realize is that some older dwellings didn't have a ground wire in the walls. The old 2 prong outlets get replaced with the newer 3 prong, but there is nothing in the wall connected to the ground pin!!! And there are far worse things going on. There are capacitors connected across the AC line in most equipment that can cause the AC to appear on the ground. So beware!
-
8.3 Hz This is a resonant circuit to the Schumann Resonance. Yes?
-
Might I ask where you acquired the schematic to make this?
-
he did die yes, at 86.
What is your source? (Bearden?)
And by whom? (Bush?)
Loading...
- 4:29Cold Electricity - Outputby plengo3,508 views
- 3:35Tesla cold electricity 5of5.MPGby HorizonDelta2,437 views
- 4:40Battery running an LED "forever" ? - Part 3by plengo4,285 views
- 9:57Coil Resonance Tutorial 4by gotoluc3,308 views
- 4:34Cold Electricity 5 (No Ground)by plengo9,010 views
- 3:06Carbon Negative Electricityby DannyatEprida8,662 views
- 1:57Cold Electricity lighting a bulbby NRGFromTheVacuum12,570 views
- 1:51Who is Jesus Christ? - Mark Driscoll Sermon Jam...by iharber20,191 views
- 1:34Cold Electricity 6by plengo3,292 views
- 2:20Jesus loves Religion: A Christian Responseby thunderbolt9413,305 views
- 2:51Cold Electricity 3by plengo2,461 views
- 6:28Tesla cold electricity 1of5by HorizonDelta6,456 views
- 33:34Jesus Christ Saved Me from 27 Years of Homosexu...by illbehonest39,481 views
- 4:45Above All - Crucified (Christian Music Video)by jackbigbox269,933 views
- 2:46Dr.Stiffler cold electricity test1 part2by overunitydotcom6,670 views
- 1:48:00From Jesus to Christ: The First Christians (01:...by HeroOfChristArchives8,047 views
- 4:29Cold Electricity 6cby plengo900 views
- 4:19240 Volts LED pilot lamp -- project 4by RODALCO200740,295 views
- 4:39Cold Electricity - 2by plengo3,006 views
Wow, what's your doctorate in? Stupidity? Any decent electrical engineer knows that high frequency AC signals will begin using capacitance as ground, and they'd also know that a breadboard is chock full of capacitance. LED's are also not perfect current blockers. There is reverse-current leakage. Thus allowing all of your LED's to light regardless of whether they're connected to an excellent ground or not.
horta1212 11 months ago
@horta1212
haha. Thanks for calling me stupid! Do you have anything USEFULL to say or show? what are your videos?
Fausto.
plengo 11 months ago
So, is the resonant frequency 8.3 Hz, 8.3 kHz, or 8.3 mHz?
TerboBlitz 3 years ago
mHz
plengo 3 years ago
That supposed AC ground may have what is called "leakage" current/voltage on it from Phase/Neural 120 volts. So from the function generator itself being connected to AC with leakage currents, your actually forming a circuit from AC ground to function generator positive. NO magic there. Measure with a voltmeter the AC ground to function generator positive, you'll see voltage difference there. YOU need an isolation transformer for your function generator to break this current.
bioelectric2u 4 years ago
You are correct, BUT, I also tried the same experiment using a Lead Acid Battery and an inverter powering the FuncGen. The ground now was totally isolated from the circuit that the LEDs still lit the same way. I think Standing Waves would be the solution here!
plengo 4 years ago