Allis-Chalmers 72 combine in oats #2
Loading...
Link to this comment:
Uploader Comments (jimacman)
All Comments (8)
-
one thing that helps is to take the back belt off and hang it on a nail so it hangs straight. this is combinechris and sorry if i seem harsh hopefully this helps some of the problem of the belt
-
@1DanielChristensen the seperating area is the same as the 66 but the width of cut is 72 inches
-
your belt has too many twists in it is the main reason it comes off. also it is not that hard to get a new one. also the wobbly pulley will throw the belt off too and needsw to be straightened.i have several of these machines and i don't have many problems with them. also need to open your wind up more.
-
I have that same combine and the back belt always comes off , tried to get a new belt but had no luck
-
is it true that this model had a 66, not a 72 inch cutting width?
-
awesome video!! GO allis chalmers!
7:23
Allis-Chalmers 66 All Crop Harvester Film Reelby AllisChalmersD1914,976 views- 0:33
Allis-Chalmers 72 combine in oatsby jimacman4,519 views
- 0:59
Allis Chalmers 60 combine with bagger at Hutch.by jimacman17,361 views
- 0:47
Allcrop in Ryeby mtg460008,038 views
- 1:04
cutting oats with a John Deere 45 combine on july 26, 08 in central ILby farmerbill7116,247 views
- 0:25
Allis Chalmers D-15 & All Crop Drillby AllisChalmersD195,332 views
- 2:42
Allis Chalmers combine convoyby dksolution104,344 views
- 3:18
Allis Chalmers Picking Wheat and Baling The Stalksby abc123bengi5,840 views
- 3:44
John Deere 3300by Areved16921,574 views
- 1:01
Case DC4 & Case Binder at Little Castertonby truckphotos7,523 views
- 4:02
Half Century of Progress 4 Allis Chalmers D17 LP Pulling 66 All Crop Corn Combine 100 1204by rfdeere5,027 views
- 1:07
1966 Gleaner Eby DanDem3417,171 views
- 0:42
Half Century of Progress 4 Allis Chalmers D17 LP Pulling 66 All Crop Corn Combine 100 1206by rfdeere4,475 views
- 3:43
Allis-Chalmers Windrow Combineby dksolution23,069 views
- 0:23
Half Century of Progress 4 Allis Chalmers D17 LP Pulling 66 All Crop Corn Combine 100 1205by rfdeere3,265 views
- 9:09
Farming in the 50sby libertycpa246,996 views
- 2:02
Wheatstock 8 : Allis Chalmers All Crops cutting wheat 100_2100.movby rfdeere1,514 views
- 0:25
Allis Chalmers HD-41, startingby lilchassid140,814 views
- 0:47
1963 Allis-Chalmers D17 Workingby DanDem3411,641 views
I am going to have to make a video showing the tab your supposed to push down to keep the belt from jumping off. 99.9% of the time that I have seen belts coming off it is not because of the belt, or too many twists it is because that tab is too far away from pulley. I have had belts that were half in grave and running on the side stay on, just to get the field done.
jimacman 10 months ago
Several reasons, that is a long distance for that belt to go without any support from an idler or another pulley. Also the shaker is causing jerks in the process causing the belt to jump a bit.
jimacman 4 years ago