not to sound like a dumbass but... i have an edge 3 tremelo on my rg350dx and it has the tremelo stabiliser system or ZP system ......can i still instal the brass block with this stabiliser system ?
@vasilios1994 Did you then eventually put the original Edge on the same guitar, or is that on another one? Sometimes with heavy use the studs will widen the hole they sit in which enables them to wobble just a tiny bit, providing horrible return. The solution is to drill the hole out, dowel it with something sturdy and re-drill.
@PikkaBird thats odd. i had the original edge pro that came on the guitar and it was shit. probably bc it was almost 10 years old :P but after that i replaced it with a new one and it was just as bad
@MarkSDD Well, if the block was what made you wanna change in the first place then the Edge Pro isn't really the solution since the block isn't that much sturdier at all.
@FloydUpgrades Nice alu Kramer there. A good harem all around, actually.
is there any way to install locking nuts on the neck of an ibanez rg120 guitar?
edwin71TOR 3 days ago
One thing i notice was off. The edge 3 is actually supposed to be at an angle rather than parallel to the body. It's a bit diff from other tremelos.
terran236 1 month ago
I'm drunk and you're bald. Your move, tremolo man.
bedofrazorsqwerty 3 months ago
@dmohr7 If it's the Edge Zero, it won't work.
MarkSDD 4 months ago in playlist Liked
not to sound like a dumbass but... i have an edge 3 tremelo on my rg350dx and it has the tremelo stabiliser system or ZP system ......can i still instal the brass block with this stabiliser system ?
dmohr7 4 months ago
@vasilios1994 Did you then eventually put the original Edge on the same guitar, or is that on another one? Sometimes with heavy use the studs will widen the hole they sit in which enables them to wobble just a tiny bit, providing horrible return. The solution is to drill the hole out, dowel it with something sturdy and re-drill.
PikkaBird 4 months ago
@PikkaBird thats odd. i had the original edge pro that came on the guitar and it was shit. probably bc it was almost 10 years old :P but after that i replaced it with a new one and it was just as bad
vasilios1994 4 months ago
@MarkSDD Well, if the block was what made you wanna change in the first place then the Edge Pro isn't really the solution since the block isn't that much sturdier at all.
@FloydUpgrades Nice alu Kramer there. A good harem all around, actually.
PikkaBird 4 months ago
@vasilios1994 That sounds like a faulty unit. Mine returns to zero every single time, even after severe diving and all that crazy stuff.
PikkaBird 4 months ago
Mine arrived this morning. Fitted and tested. Definitely a huge improvement over the scrawny stock Ibanez block.
MarkSDD 4 months ago in playlist Liked