1.5kw Air cooled Spindle
Loading...
Loading...
3:08
DIY_CNC_Spindleby rlandry525,237 views- 0:44
1.5kw air cooled Chinese Spindle testby dacostad10,712 views
- 1:02
2.2kW China spindle testby Jonblissett5,706 views
- 0:35
CNC Gripper Introby CNCGripper7,461 views
- 4:18
2.2Kw Chinese spindle 24000rpm on my new Z axis plateby cyclemadkiwi1,405 views
- 1:04
Air bearing spindle with 1000 pound loadby DaveArneson11,254 views
- 1:27
2.2Kw Spindle on newly complete Z axis with new Y axis rails in placeby cyclemadkiwi1,562 views
- 0:37
mototecnica er20 spindle motorby jvoytilla5,576 views
- 0:41
cooling setup for the CNC spindleby irfanullakr6,406 views
- 0:39
Spindletestby TerjeLangen3,371 views
- 2:49
Sodick's 120,000 rpm HSM spindle - Video Demoby SodickUSA142,851 views
- 7:26
EBAY AND PAYPAL SUCKS A BIG ONEby JWBUBBAMAN3,530 views
- 5:17
Cnc Rebuild Video #35by diyengineer3,124 views
- 1:06
2.2KW Spindle Testby mrredshoes6,048 views
- 1:46
China spindle test setup.by INWondeR1,880 views
- 0:38
Water Cooled Spindle 2.2 kW first runby Lonitech1,797 views
- 4:11
New Spindleby pursean3,656 views
- 0:12
Bad Chinese manufacturersby raport792,386 views
- 2:52
Air Turbine Toolsby FiveAxisTech3,212 views
I'm using a Kress 1050 on my home-built rig, or would be since it is away or repair at the moment. I'm now considering using a Chinese air-cooled spindle. However, it seems to be difficult getting wiring schematics and info on to how to interface these things to the Mach3 post processor for controlling their speed. Can you could help. What is the lowest controllable speed of these motors? There seems to be plenty of info on how fast they will run but not a lot on their lowest speeds. Many thanks
miopicman 3 months ago
Hey, I'm trying to find information on the spindle you have, have you measured the run out on this tool? Are you able to use microbits, like #89 or similar bits? Thanks!
iownthefrench 1 year ago