Glue Tubular Tire on to wheel - Rabobank - Vincent Hendriks Tour of California 2010 186.AVI
Loading...
Uploader Comments (301steady)
All Comments (9)
-
I just fully cleaned a wheel based on hearing that the tire bed needs to be clean each time i mount a fresh tire....Now I'm wondering if that isnt the case, Could I get away with using the old glue still on rim and gluing the new tire, and only cleaning the rim pefect every 2nd or 3rd tire change? Anyone got any input on that??
-
So all he did was one heavy coat of glue on the rim?
-
Most manufactures recommend using Acetone or Benzene. I'm sure that's what he was using to clean the sidewall / braking surface.
-
about the cleaning solution, not sure what he said at first, but when he said it louder it was benzin, which in croatian (im croatian) means gasoline. when i plugged it in to google translate and asked it to detect the language, it said it was a danish word also meaning gasoline.
3:31
Tour de France 2009 moment not to rememberby dondefant54,280 views- 2:02
10 steps to mounting a Vittoria tubular on a carbon rimby vittoriageax34,102 views
- 9:58
Mounting and Glueing Tubular Tiresby zippspeed15,106 views
- 1:33
Continental Road Bicycle Tiresby PerformanceBikes492 views
- 4:32
Zde-nek Sty-barby ODT19825,163 views
- 3:45
Removing Tubular Glue from Zipp Rimsby zippspeed16,192 views
- 3:02
How to change a tubular tireby 2010tand4,185 views
- 8:04
Cyclists Cornering At Over 35mph in Dade City FL, One of The Most Technical Crits in Floridaby chavezcycling60,127 views
- 80 videosAll
- 1:48
Wayne's Wisdom No. 2 - Wayne Talks Tubularsby dogthomson9,871 views
- 5:37
come montare un tubolareby iopedaloit20,602 views
- 8:43
Continental - mounting instruction for tubular tyres, aluminium rimsby Continental2Wheel10,819 views
- 1:37
Continental Sprinter 22mm tubular tyresby globalistic3,718 views
- 2:12
Riding with Rabobankby RideGiantBicycles18,620 views
- 2:04
Bissell's Ben Oliver gives a tour of the mechanic's truckby podiuminsight6,346 views
- 2:17
Tubular vs Clincher - tyre system choiceby ChallengeCopenhagen4,672 views
- 3:44
Inside the Garmin-Slipstream busby garminblog24,026 views
- 2:30
Pre-TdF packingby TGTProCycling7,242 views
- 12:05
How to glue a tubular tyre.mp4by TriSpecific3,318 views
- 2:21
How to Mount a Tubular Road Bike Tireby Mach3Multisport106,211 views
The rim and more than likely the tyre would already have a 'preprepared' layer of glue on them. they do this well in advance of the race in their work shop when they get the shipment of rims and tyres. when they pull an old or puctured tyre off usually the glue layer stays on the rim and the new glue sticks the glue on the rim to the glue on the new tyre.
killar770 7 months ago
@killar770 It does bring up a point about this rim. He peeled off the old tire and scraped off what he could of the old glue. He lightly used a knife and a wire brush to do so.
He then applied the glue and the new tire.
301steady 7 months ago
That's it. They do a lot of tires in a matter of minutes. One heavy coat keeps it efficient.
301steady 8 months ago
Good thing he's a fast mechanic, because my hand would have really hurt, if he took too long.
301steady 1 year ago
@301steady The cleaning product is Wasbenzene. Alcohol eats into rubber.
Memory card went full here; and, the whole job was finished shortly after; but, the process was pretty much covered.
301steady 1 year ago