HAKKO 808 DESOLDERING TOOL REVIEW
Loading...
Loading...
3,488
Loading...
Uploader Comments (starlino)
see all
All Comments (7)
-
@ebayisajoke There are dozens of tips available for the 808.
If you do even a modest amount of tech work then an 808 is an indispensable tool. It will pay for itself very quickly if you use it for harvesting components off dead boards. I've easily harvest 1000's of $ in IC's, caps, diodes, triacs, voltage regulators.. I do a lot of repair work and next to my oscilloscope and spectrum analyser the 808's about one my most used tools. I'd replace it in a sec if it broke!!
-
this tool only seems to do one size, what about the smaller pins?
Loading...
1:07
Edsyn - DS017 Soldapullt Desoldering Hand Toolby EdsynProducts1,901 views- 0:32
Using a Vacuum Desoldering Toolby CuriousInventor153,889 views
- 2:24
Goot TP-100 Portable Desoldering Iron Gunby ChipDipvideo2,193 views
- 1:28
iPod touch Battery desolderby offmains12,632 views
- 0:37
Weller Soldering Desoldering Toolsby rayskd20008,470 views
- 4:32
Desolder a SMD SOIC with only basic tools.by Mulletsrokkify22,262 views
- 2:27
How To: Desldering With a Heat Gunby Geekxboy1,310 views
- 2:42
De-soldering Transistors with a Rework Station.wmvby 360Repairs945 views
- 0:23
Easy through-hole solder pad cleanup with hot air.by claycowgill4,056 views
- 7:57
Aoyue 852 demonstrationby smbakeryt35,692 views
- 1:44
BD-1BA JBC Soldering Stationby shaneeustice1,656 views
- 5:27
Removing Capacitors.mp4by hitandrun839,219 views
- 2:56
Hakko FM202-01 Soldering System Instructional Video FM203-01by Tequipment2,482 views
- 1:39
Hakko FM2023 Mini SMD Parallel Remover FM2023-05 FM2023-02 FM2023-01by Tequipment4,945 views
- 3:30
SMD Removal using a Chip Quik kitby kore46463,783 views
- 2:12
Hakko FM-204 Desoldering and Soldering System by AMERICAN HAKKOby HakkoSoldering350 views
- 2:08
Desoldering 2by edtforamateurs124,734 views
- 2:47
TV Repair Desoldering made EZby tvrepairkits7,951 views
- 0:43
Aoyue 6028 Desoldering plastic componentsby SolderingSystems13,225 views
- 1:38
Desoldering 1by edtforamateurs120,319 views
it has various size nozzles (tips) , some might come with the kit others you can purchase separately
starlino 1 month ago
You don't need a new camera, just position the material being filmed 10 to 15cm far away. Note the can and sponge to clean up soldering iron tip, it is perfectly in focus.
If your camera has focus ajustment, probably you could adjust focus for shorter distance. The desoldering movie is good, just redo with a better focus. Cheers.
wagnerlip 1 year ago
@wagnerlip thank you for the tip ! I think I'll just hold the camera with my teeth or tape it to my forehead , that should put it at good distance ! :)
starlino 1 year ago
Starlino, so you never saw your own movie, huh?
The board is completely out of focus.
You don't need to be a movie director to understand that and redo the recording.
Come on, have some pride of what you do.
Do it right.
wagnerlip 1 year ago
@wagnerlip thank you :) you just convinced me I need a new camera :) I am not a film director though , but I 'll try to do better videos
starlino 1 year ago