Colt 1911 Barrel Fitting Hood Fitting Part 1
Loading...
Uploader Comments (JackWeigand)
All Comments (8)
-
Why don't you just take all .006 off the right side? Why bother doing .005 off one side and .001 off the other? Can I do this with hand tools?
-
cool barrel !! sure beats the addednt lengthe and sight interfetence of a compensator. I would use a file but i dont have that fancy equipment !
-
Seems kinda funny that you are taking such painstaking efforts to get accurate measurements with your layout tools only to introduce tram error when you are machining. I'm sure that when you are not having to film you can do all the machining faster, but filing still comes pretty close and you can't beat it's precision.
Neat fixture concept, though.
-
awesome video thanks for sharing!
-
Thank you. I can't wait to see the next video you mention, cutting the bottom lugs.
-
Nice! This is a cool looking setup.
-
Cool!
9:33
1911 Colt Barrel Fitting Lower Lug Part 2by JackWeigand9,400 views- 2:40
springfield 1911by gimador29,711 views
- 1:28
The 1911 - A Fatal Flawby 5shot213,790 views
- 3:17
Brownells - Installing a 1911 Grip Safetyby brownellsinc25,900 views
- 7:57
Animation of a 1911 pistol's operationby DarwinTe373,949 views
- 0:59
Colt 1911 firing at 600 frames per second slow motionby wavelength197071,913 views
- 7:32
Hard fitting a match barrel to a 1911 pistolby severnscustom6,763 views
- 0:42
MINi MACHINE GUNby fox19er13,315,833 views
- 13:57
1911s Made in the Philippinesby TheAgeOfExploration45,403 views
- 7:20
Slide Fitting Part II.wmvby kgunz114,929 views
- 4:58
Problems With The Glockby FitzenKnives169,337 views
- 3:21
1911 45 Pre-Buildby 1911bulider11,870 views
- 6:07
Wilson Combat Gunsmithing - Polishing The Feed Rampby TheArmoryHD15,735 views
- 8:56
1911 complete Disassemblyby thekingof80862,794 views
- 5:18
Smith & Wesson "E" Series 1911: 21st Century 1911?by VuurwapenBlog30,112 views
- 4:34
Lug fitting, Part 4by JackWeigand10,651 views
- 8:46
1911 Trigger Job 3 of 3by OhioYJ14,680 views
- 17:54
1911 Springfieldby hickok45222,965 views
- 1:06
Smith&Wesson 4006 40cal filmed at 600 frames/secondby wavelength197010,932 views
Because the hood is not centered exactly in the breech face. If you think of it as a 360 degree circle it is a few degrees around past say 90. It vary s from gun to gun. It was done for years with a file but not with the accuracy it can be done in a mill. I can end up with less than .0005" gap doing it with my fixture. I hope this is the answer you were looking for?
Jack Weigand
JackWeigand 1 week ago