Sorry for the bad quality, took it with the 2Mpx mobile phone...
Here is the latest setup for this copter...
Receiver RX2610v Aile gyro 100%; Elev gyro 100%; Bal delay 0%; A-E ext. 75%
Transmitter WK-2801pro Elev D/R 100% exp -5%; Aile D/R 100% exp -15%
Progmix1 Aile-Elev sw: on on; offs: 0 rate: +25%; curve: off rate: -25%
Progmix2 Elev-Aile ws on on; offs: 0 rate: -50%; curve: off rate: +50%
Pitcurve: norm. 40-45-50-56-64; st-1. 30-38-45-55-64; st-2. the same (+-10*)
Throttle: norm. -16-50-75-90-100; st-1. 100-85-75-85-100; st-2. the same
Gyro gain 75%
It flips nice and makes fast turns, easy to contril.
600mAh 20c battery and standard ESC and motor...
Do you need to do something special to make it fly upside down, or do you just maneuver to go upside down and it will fly that way?
Way2Evl 11 months ago
I used progmix to correct the rotor phasing (to make my heli to fly straight in FFF).
At the moment I use green Locktite 609 instead of progmix because I had to replace the main shaft and noticed that mounting holes of the new main shaft were so much off that I was not able to correct the phasing issue with progmix anymore. So I turned the washout base upisde down and fixed it to correct position with screws and Loctite 609.
It is so bad that Walkera's spare parts are of such poor quality!
Picoflyer 1 year ago
What the promix for?
In head lock gyro mode the mixture will accumulate the extra movement.
ej1899 1 year ago
The heli was stock except a HP08 & XP07 ESC.
Picoflyer 1 year ago
Thank-you for your posting - great flying. What modification or settings you had to do from the original factory set up?
geston88 1 year ago