1967 Shelby Mustang Terlingua Coupe

Original S-Code 390c/u with a 4 speed transmission. Shelby Trans Am coupe Replica:
Motor: Ford 302 Roller Block, 347c/u, Solid lifters, Probe Pistons, Aluminum Heads, Comp Cam XR-286 R-10,

Transmission: Tremec TKO600 RR Transmission

Hydraulic Clutch
Canton 9qt. road race oil pan and windage tray

Front Suspension: Total Control upper and lower control arms, Total Control Coil-Overs, Total Control Rack & Pinion, 1 1/4" Sway Bar

Brakes: SSBC 4 Wheel Disc Brakes

Cooling: Big Block Radiator with dual electric fans

Fuel: Holly 650 d/p Carb.

22 Gallon Fuel Safe

Exhaust: JBA Headers, Magna-Flow Tubular Mufflers Side exit pipes,

Rear Suspension: Pan Hard bar, 9" Posi rear, 389:1 ratio, Spax Adj. Shocks, 5 leaf rear springs, Traction Bars,

Wheels: PSE 15" x 8" Tires: Dunlop 245/50/15,

JME gauges

Sub-Frame Connectors.

Set-up JBA racing

Category:

Autos & Vehicles

Tags:

• Shelby
• Mustang
• Vintage
• Trans-Am
• Racing
• Terlingua

[kg6120]

They are round/tubular magna flow mufflers

[badoidoy8306]

I have a 68 coupe too and i wanted to know how you got so much tire in there. i currently have 205 60 15 front and 235 70 15 rear (thats how i got it). Also, how much did it cost to stroke it to 347? including labor?

[kg6120]

@badoidoy8306 First of all, as far as I know there is only one company that makes a vr/zr speed rating in this size. That is dunlop. Then you will need at least 4.5" backspacing. That should do it. This motor, which was relatively in-expensive cost me about 7K. I didn't stroke an existing motor. Hope that helps

[crv26]

did you keep the 390 hypo? or did you replace it with something lighter?

[kg6120]

When I got it, it had a 289. I have a 347 in it now. I don't know what happen to the 390.

[juanchopj]

Nice ride!!!!!!!!!!!!!! i have a 68 cod "8R..." and i live in Venezuela, its very special car here because its import from the states, and my idea its to transform into a shelby or terlingua racing team, but the scheme of paint that i`d like its the Hinchliff/Ross 68 racing team.

Sorry for my english XD

[kg6120]

Have you seen the silver and black one Jay Bittle owned? I think he sold it. His shop, JBA did a lot of work on my car. Good luck with yours!

[CrazyIrishCarl]

nice car but would not have done it to an S-code

[morderca95]

love teh fuel pump sound, i bet some people would think its the engine sound and after that... wroom burp burp

[MrGjordin]

ha ha you passinger must be a chevy fan if he needs to change his shorts from that little accelartation lol

[djguntner]

what mufflers are you running thats how i want my stang to sound

[67stang721]

And by the way, we are going for a road-race look.

[67stang721]

Me and my dad are looking to lower his 1967 mustang fastback around an inch, and we were wondering what type of lowering kit should we use? We need a slightly stiffer kit because right now if we got over train tracks the tires rub in the wheel well, maybe a mini-tub will fix this. Take a look at my videos to look at the Mustang. Please help, thanks.

[TheMassdistortion]

Beautiful!

[dillman1999]

i have a 86 merc capri with a rare bubble hatch

[wonderbreadkw]

sorry the vid is rate BA for badass