11-Attaching Ailerons Part 2 - Building HZ Super Cub from Scratch

A series of videos of how to scratch build your HZ Super Cub. In these videos I'll show you how to do simple mods to strengthen the stock equipment, add lipos, ailerons, electronics and cover your plane.

This is a multi-part video - Part 2... Mounting the Ailerons.

Listed below is a series of videos on Scratch building a Super Cub. Click on one of the links to view the tutorial.

Part 1 - Modifying the Fuselage (BatterBox)
http://uk.youtube.com/watch?v=BjtM_faxRu4

Part 2 - Modifying the Fuselage (Wing Saddle)
http://uk.youtube.com/watch?v=pWN0nQwW3sE

Part 3 - Covering the Fuselage Part 1
http://uk.youtube.com/watch?v=2wb5YPuYoeA

Part 4 - Covering the Fuselage Part 2
http://uk.youtube.com/watch?v=3uDvmropio4

Part 5 - Cutting out the Ailerons Part 1
http://uk.youtube.com/watch?v=uRYb6Ta8zhE

Part 6 - Cutting out the Ailerons Part 2
http://uk.youtube.com/watch?v=cNtFguDVmDE

Part 7 - Covering the Ailerons
http://uk.youtube.com/watch?v=CePQYPLQAzo

Part 8 - Covering the Wing - Bottom
http://uk.youtube.com/watch?v=s3ajSwWuVU8

Part 9 - Covering the Wing - Top
http://uk.youtube.com/watch?v=Q6ihrh_3Bxs

Part 10 - Mounting the Ailerons Part 1
http://uk.youtube.com/watch?v=jR5f4OlQmHQ

Part 11 - Mounting the Ailerons Part 2
http://uk.youtube.com/watch?v=dd0xDFaIldc

Part 12 - Installing the Ailerons Servos
http://uk.youtube.com/watch?v=YaC1x53JIF0

Part 13 - Installing the Aileron Control Horns
http://uk.youtube.com/watch?v=YaC1x53JIF0

Part 14 - Installing Can Motor & Battery Box Mods
http://uk.youtube.com/watch?v=gM6LUL5KeoU

Part 15 - Installing the Electronics
http://uk.youtube.com/watch?v=prRsnlzSIyI

Part 16 - Modifying the Landing Gear Part 1
http://uk.youtube.com/watch?v=jQLRvfFHWgY

Part 17 - Modifying the Landing Gear Part 2
http://uk.youtube.com/watch?v=WkdPmUWOojs

Part 18 - Adding & Making Custom Decals
http://uk.youtube.com/watch?v=vj_sT1fq7-0

Part 19 - Finding COG & Balancing the Plane
http://uk.youtube.com/watch?v=kq2VeC9-n9Q

Part 20 - Adjusting & Centering the Ailerons
http://uk.youtube.com/watch?v=CWj8DZvGyjQ

Category:

Education

Tags:

• Hobbyzone
• Super
• Cub
• Modifying
• Adding
• Ailerons

[steelheadhtr]

Wow! I have to say, you are a master craftsman. Great job! I’m going to do flaps on my foam wing J-3 cub. In doing flaps, do I want to put the hinge near, or on the top of the wing, & the same on the adjoining flap piece, or should the hinge still be mounted down near the center? Also, you cut two 45 degree angles, but for flaps, would I cut one longer 45 degree angle from the top of the flap piece to the flat edge? Or would you recommend a different hinge method all together? Thank you!

[MsKing54]

how much would u charge to do this for me

[claudiodk1977]

i ve just got my first cub. tnx so much for yr tip! great vid and great job!!!!