Novadreamer Tutorial Pt. 2
Uploader Comments (slstride)
All Comments (32)
-
I don't understand why lucid dreaming is not done by many? It's awesome!!
-
@Trance1972 so did it work after? i may buy it i really want to lucid dream
-
@SlowNMlow Once in a dream one of the characters told me I was dreaming, with no provocation whatsoever. That was really, really weird.
-
I wanted t buy one of these, but i finally had a lucid dream randomly by telling myself i was dreaming in my dream. one of the weirdest experiences of my life.
-
where can i find one these days preferably used ( already tried ebay) thanks
-
2:25 Two triple A batteries. lol, he probably said double A the first time.
-
that was awnsered a long time ago lol, i've already lucid dreamed too. pretty neat. feels weird when you wake up though.
-
yes! in a lucid dream you can do what eva you want!!!
you remember it right when you wake up
-
discontinued in 2004. The Novadreamer 2 is going to be released soon.
-
Sadly, I no longer have it. I think I failed to pack it when I moved.
I purchased one, but didn't really have any results and in fact, would often wake up with the mask off, with no knowledge of removing it
Trance1972 2 years ago
Dear Trance,
Do you ever sleep-walk? You may just have poor short term sleep memory. It's not uncommon to arise for WBTB, remember many dreams and completely forget them later. With the ND you must train yourself to specifically recognize the flashing red lights as a dreamsign. Do this before bed or during WBTB. Set the # of flashes to 60 with 1 second pulses. With closed eyelids watch the flashes and affirm the red flashes are a dreamsign. Repeat this 5 times by holding down the RT button.
slstride 2 years ago
Dear Quasar1334,
Did the battery terminals look corroded when you replaced the batteries? If so, clean off all the residue with a Q-tip then brush them with a fingernail sander or 600 grit paper. Look at the board on both sides for broken or burnt parts, or cracks in the board. The PIC IC (CPU) is probably okay but may need to be re-seated. Give all that a try first and write me.
Sincerely,
Scot Stride
slstride 2 years ago
one of the terminals was coroded. I cleaned it with 400 sand paper. Everything on the board looks ok, no cracks or anything like that. But still no luck. Any other ideas? thanks.
quasar1334 2 years ago
Dear Quasar133,
The next step is reseating the PIC chip. It is the long one with 18 pins. It can be lifted by putting a small screwdriver in the ends and alternately prying upward. Do not pull it out all the way, only lift it out about 75% and push it back down. This should wipe any oxidation buildup from the contacts. Good luck.
Scot Stride
slstride 2 years ago