94 geo metro dyno run 1

46 horse 52 foot pounds of torque.
1994 Geo metro hatchback 1.0 M5. 186,000 miles. 3 Tech 365/222 cam, +10 cam gear, air intake piping to fender delete, tbi bridge delete, exhaust unbolted after cat, timing at 17 degrees, lowered 1 1/4 coils in front 1 1/2 in rear. 91 octane

Category:

Autos & Vehicles

Tags:

• geo metro
• geo
• metro
• 3tech

[kiknlif]

It is a manual. I rebuilt it since then so i might have a couple more horses. It is rated at 53 horse from the factory. The engine is basically stock besides a cam and cam gear. Cam gear lowers the torque range, and cam keeps power past 5 through 7.

[kiknlif]

@monono954 with the cam install it made 46 horse right at 5900 rpm. it made 45 from 5100rpm too 5900 where it spiked to 46 but i shut her down at 6 to keep the engine from blowing, amazing after the cam install power didnt fall off after 5300 rpm like the stock cam did.

As for torque, it made peak torque at 3600 rpm 53 foot pounds

[ethanstephenson]

wow, u actually dyno-ed a metro.. probs, i think my grandmothers raskel can do that much. ;) jk.

[aaron71]

I take it that's an automatic? These were rated 49 crank hp factory and with mods you're only getting 46 wheel hp?

[kiknlif]

@1997FordProbeGT

Thanks, im in the process of rebuilding it. burned number 2 exhaust valve. its such a fun car

[monono954]

quick question, at what speeds were your horsepower and torque numbers taken?