Utilization of Radiant Energy 1901 Nikola Tesla,My test2

Now you get to see my set up of the plates described in the patent. I show that we are about 30 ft up in the attic of the house. I show the metal plates used to gather the radiant energy from the charged particles and such. The metal plates are about 3' by 2' and they are the HVAC solid plates found at a home depot or lowes for like $10. The plates area is proportional to the amount of energy recovered from cosmic/radiant energy. The plates have to be insulated to see some good results in the discharging circuit so I used a clear plastic laminant. The plates are totally covered by the laminant so no electric charged is lost to air molocules passing by. At one corner of the plates I drilled a hole and put a screw through the panel so i could attach a wire to it with a nut. The two panels that I have up are tied together and then the antenna runs off down stairs to my charging/discharging circuit on the second floor. If you stick around for the next video you are going to be shocked by the results in the charging/discharging circuit.

I wanted to try copper plates because of thier high conductivity but the price of copper plates are expensive so I wont be able to try this until I get some more money. If attempting to make the plates, make sure they are insulated the best you can make them with out any air bubbles if you can though i got some on mine but still got great results. There is still alot of factors to test, supposedly even higher placed plates would conduct better but then again this could become dangerous becuase your making a possible lightning rod, from this setup you dont need to put the plates outside though there might be a difference, still something I have to check out. Ive only just begun the experiment with really good results so far.

Category:

Science & Technology

Tags:

• nikola
• tesla
• utilization
• of
• raidiant
• energy
• 1901
• electronics
• high
• cosmic
• ray
• particle
• alternative
• free

[RobMonty248]

cant see nothing =(

[boxa888]

u will see better views of the panel on the other videos. i know , i should have put up some lighting lol. its a good experimnet if you build it .

[boxa888]

hey sorry about the brightness, i didnt have a light over the panels, can someone just leave a comment just so i can see if the blog is working, im not sure if others can leave a message. message me if you cant leave a message

thank you!

[oztronix]

Kid: Make the videos again, and make shure they are visible.

This is nonsense...