Align T-rex 550e 3gx something snap or came loose & tail boom strike Sept. 2,2011.MP4
Loading...
1,828
Loading...
Uploader Comments (hiki2502)
see all
All Comments (8)
-
Hello, there is a big issue on the slider of the 550 V2. The spacer between the 2 bearings of the slider gets welded to the aluminium body because gap is only 0.005mm between them ! I broke 2 H60077AT and cutted one before understanding the problem. Your video sounds looks like if something was slowing down your heli before everything brakes, strange...
-
THE PROBLEM HERE IS SIMPLE 3200 HEAD SPEED THE SHELL EVERY TIME
Loading...
So 3GX setting is not automatically reset to factory default during crash?
if your 3GX setup still there, sound like the problem is really the mechanism.
andytam11 5 months ago
@andytam11 yes the 3GX is working perfectly.. the causes of the crash is mechanical...
hiki2502 5 months ago
Did you check the setting of 3GX? Some ppl report the setting reset automatically during mid flight, hope this do not happen to yours....
andytam11 5 months ago
@andytam11 yes i did check the settings on the 3GX . and when i review the video i heard some high oitch sound then the heli spin out of control and something just snap and blade hit the boom . i hit throttle hold but it is not recoverable it just happened too fast..
hiki2502 5 months ago
how did this happen did something come loose ???
hope you can repair it
MrJOHNM3 5 months ago
@MrJOHNM3 i suspect that the pinion came loose (notice it when i pick up the heli)and stall the motor the momentum of the tail rotor kicks in which cause the heli to spin, i hit throttle hold and suddenly the blade hits the boom and fell on the ground.. the heli is back in the air again ..
hiki2502 5 months ago