Desolder SMD without special tools
Loading...
Uploaded by MrKobalts on Jul 15, 2011
To start web publishing visit http://yourdomainkit.com
- 179 likes, 8 dislikes
-
Uploader Comments (MrKobalts)
Top Comments
-
That's really really smart now why I didn't think of it.
1 month ago 3
All Comments (35)
-
nice
-
hola me podes hacesorar en las funciones de unos componentes
-
@TheBypasser I just used your method to remove a defective quad comparator in a stereo mixer. Worked great, instant melting of the solder without over heating the board! Thanks for the tip. I thought about the bent wire method but didn't think the time factor would be good for the board and adjacent components, but still a great idea that works. Thanks to both of you.
-
@Riskteven I was removing the ROM chip to put a Genesis cartridge slot in since the Radicas are clone consoles capable of playing cartridge games. The ROM chip is connected to the main pcb with the original style data lines. Just wanted to create a super small genesis system.
-
@MegaSonicdude10 I use a PC to play games. That way I never have to risk destroying a circuit board just to be able to backup installation CDs or saved games.
-
@TrustMe2morrow It is not high voltage.
-
this is a very good idea, thanks will try it out
-
Better than pumping a load of tin on the IC feet.. lol
-
Nice!
-
@MrKobalts i like your english
- 2:51
Joao Marcio e Fabiano - Casa das Primaby 2r1i19,226,824 views
- 0:41
Ultrasonic soldering 超音波はんだ付 フラックスレスでガラス面をはんだ付by japanunix13,597 views
- 5:52
Cavitacionby albertodelest66,289,160 views
- 4:32
Desolder a SMD SOIC with only basic tools.by Mulletsrokkify22,262 views
- 2:18
Frying Pan SMD Reflow Solderingby halfinchhole38,217 views
- 3:02
Floppy Drive Motor Hackby 30GB839,289 views
- 0:31
Magnetic Field of a Coil of Wireby JeffRegester406,854 views
- 6:09
80-pin QFP Re-Soldering.mpgby vancovideo9,873 views
- 17 videosElectric
- 0:25
Removing SMT resistor with single soldering ironby aprsworld13,490 views
- 4:45
Reballing, GPU Long Term Fixby reply4reply198,320 views
- 4:22
Here's why you should NEVER take the cover off your hard drive...by gillware143,612 views
- 6:50
How to Solder, tips and tricksby filear27,713 views
- 3:17
Broken Graphic Card?? BAKE IT!!!by MaEtUgR48,390 views
- 1:51
Moving the meter backwards!! :)by enviergy145,282 views
- 3:08
Removing RAM from your xboxby stilts07297,801 views
- 0:24
RAM overclocking failureby Afrotechmods681,416 views
- 3:48
quim barreirosby anfalz24,805,736 views
- 1:57
Solder a 100-pin LQFP SMD-ICby WatterottElectronic64,286 views
- 5:49
Desoldering an SMD chipby rkruetzfeldt19,801 views
Good idea, better with a small amount of flux paste
robliotalon 1 month ago 6
Of course!
MrKobalts 1 month ago
I prefer bending a wire and putting it into a soldering gun (NOT the hot air gun of course, the one with high-current heater tip). Pretty much the same method however (yet faster a bit). Also a funny find - a turbo lighter proved to be plain perfect in small SMD rework (up to 10x10mm). Though needs some skill or the board may delaminate, of course :)
TheBypasser 1 month ago
Yes! Method with a strong current gun really great, but there is an opportunity to damage the chip, so that the nichrome wire AC high electric potential. But the idea good!
MrKobalts 1 month ago
I hope you are not working for any electronic company....that's scary!!!
TrustMe2morrow 1 month ago
Do you think in GE's do it better? View the latest video ...
MrKobalts 1 month ago in playlist More videos from MrKobalts 2