10 psi turbo r18 tsi kit 2008 Honda Civic
Loading...
Link to this comment:
Uploader Comments (AdamWirtz2001)
All Comments (50)
-
@AdamWirtz2001 a "cracked" rod is a good thing.
This design holds better due to increased resistance to rod bolt / stud failure. Think of it this way -> if you mold two pieces of glass separately then try to join them together, it'd be almost impossible to get a perfect fit, whereas if you break one solid piece of glass just right, the jagged ends that result will fit together quite nicely :)
-
technically, no.. you can't find a forged piston set for this engine. however, if you know what you're doing, you can have a custom set made for $700-800. I guess the bottom line is: with enough money, anything is possible :p
-
@jmosquito56 No it's not haha tires don't squeel in first gear at 30 miles per hour
-
there are no forged internals for this r18
-
@atmosphere145 its in mph
-
i was wondering i have a 2008 civic lx i wanna get a muffler its automatic still would it even sound good or wat and could i get an estimate on how much a transmission swap would be or would it be worth it cuz i wanna get a turbo or should i just stay auto and put the turbo on?
-
10 PSI on stock internals???
-
@ AdamWirtz2001
Cracked cap connecting rods
-
@AdamWirtz2001 lol nothing exists for our engines yet! it sucks
1:26Honda Civic FK2 1.8 (R18) Turbo @ 0.4bar by Hon...by Untouchable187um4,410 views
- 0:2806 Civic EX 60 - 100 tsi turbo kit (r18)by sofaking4491412,229 views
- 0:17k24 vs R18by sanyamtyagi2,894 views
- 0:43Turbo 08' Civic Si 500HP street pullby roxyfoxylade124,263 views
- 0:172006 civic ex, r18 turbo tsi kit, closed road wotby sofaking449146,018 views
- 2:32Turbo R18 2008 Honda Civicby 8thgenInAL1,655 views
- 1:34RX7 Tunnel Boost @ 10psiby kashrx7122,031 views
- 2:28Honda Civic R18 Turbo Videoby ProCivicVideo80,878 views
- 0:31Honda FG1 R18A1 with TSI Extreme R18 Turbo Kitby Blackmagic108811,008 views
- 1:3606 civic ex, tsi turbo kit, first startby sofaking449142,587 views
- 2:42AJP TURBO SI 12.50 @ 117.8MPH 10.5 PSI BOOSTby ajpturbopittsburgh29,528 views
- 1:122008 Honda Civic Si turbo buildby computersupport23,547 views
- 6:39Honda Civic R18 engine bolt ons buildby k20socalef6,818 views
- 0:27Full-Race Turbo R18 Honda Civic EX - powered by...by FullRaceVids15,352 views
- 1:05R18 civic dyno #1 on 1/29/09by cplmang4,597 views
- 0:19r18 tsi kit small revby turboR186,537 views
- 1:01R18 turbo 1/4 mile, inside car..by civicpride198620,187 views
- 0:36tsi r18 in carby turboR189,686 views
- 1:472010 r18 Civic exhaust and 0-60by jjh23h8,362 views
I fixed my car but now it is hanging at 3500 rpm how can i correct that?
iyif28 2 years ago
your tune is bad. well, actually the tune might be okay. Butta you gotta clamp the MAF sensor so the ECU does not actually see the real MAF readings. If the MAF is not properly clamped, it will put the car into limp mode everytime you spool up.
AdamWirtz2001 2 years ago
r18a1 comes with cracked rods stronger than k20
watchforfinger 2 years ago
I'm confused. Can you explain what you mean by cracked rods? or were you be facecious?
AdamWirtz2001 2 years ago
another question do you have in your r18 forged pistons and forged rods?
iyif28 2 years ago
What? You broke a rod? Are you sure? I have stock internals. I don't think any forged pistons exist for the engine.
AdamWirtz2001 2 years ago