7m tap - what is it?
Loading...
Loading...
1,626
Loading...
Uploader Comments (BoostedInline6)
see all
All Comments (11)
-
Is that 171k on stock HG/Torque?
-
Yeah that sounds like rod knock to me...
-
sounds like valve lash, these don't have hydraulic lifters. so they wear out, put a 5m in there it'll solve the problem ;)
-
idk if u ever figured it out but to me that sounds like a rod knock. check out my supra. mines a little more drasatic then that but its very similar
-
sounds like a pully/belt/fan to me
only hits under load when the engine is being forced upward
maybe even engine mounts, you mentioned many miles on the motor, try new mounts.
-
sounds like a rod bearing man, mine does the same thing, especially if you have coolant in the oil, that will dry out the bearings
-
sounds like maybe the water pump, but the bearing makes more sense.
Michael764
Loading...
1:39
the knock of doom...by sirlanceem25,304 views- 0:37
wrist pin knockby corvette669851221,115 views
- 7:16
My dad blew up my truck and pretends like he doesn't know why it wont start. ( Blow v8)by vixolot177,381 views
- 0:30
Piston Slapby swlsy12364,179 views
- 1:01
1991 Toyota Supra 7M-GE Slight rod knock :(by HKStwinturboz3,819 views
- 0:35
My 1987 Toyota Supra MKIII Engine Rod knockby HitmansEVO11,178 views
- 0:44
1988 Toyota Supra 18Lbs Boost!by 1989GTADRIVER36,500 views
- 0:29
Rebuilt 7mgte toyota supra bone stock revving with no exhaust.by ilikesbdunks6,247 views
- 0:24
Supra Rod Knock 2by poweredbygoya6,765 views
- 67 videossupras
- 0:34
1995 Integra engine ticking noiseby JDMjermbo2,742 views
- 0:22
Toyota Supra, 7MGTE, 380 RWHPby dalphc2,295 views
- 0:48
valve knock? or worseby junker176,387 views
- 3:24
86.5 Toyota Supra problems. Rod knock? Seized up now.by dannydavi7,246 views
- 2:29
88 supra 7mgte fresh build ma70 turbo AEM EMSby Slow7MGTE25,545 views
- 1:12
2002 WRX Piston slap or what?by DiaS6501,797 views
- 0:57
mk3 7mgte dynoby kotu1005,297 views
- 1:54
New Flow Bench: doing its thing!by imfeelinghungry505 views
- 2:23
supra turboby tomy951ka24de1,040 views
- 1:20
350 Small block...Makes knocking sound...Camshaft...rod...crank...main bearings...piston?!?!by vmunoz8510,247 views
- 1:15
Engine Knock in performance enginesby steve123wolf5,714 views
Well, the old motor is long gone and was replaced with JDM 7mgte. She runs great.
On the old motor, we pulled the oil pan off it had 2 spun bearings. Also, the crank pulley keyway was destroyed. Not sure how that happened.
BoostedInline6 1 year ago
Yea, Michael that water pump might also be playing a part. Looks like the motor will have to be pulled come summer since it's now using coolant too(BHG) lol.
BoostedInline6 2 years ago
I have a 5vz that has a knock/tick. Low load conditions the ticking sound would pop up, during load you couldn't hear it. It sounds close to this, i could rev it and only at certain points could you hear it. Like when i began to let off throttle. I easily found which rod it was by dropping the oil pan and wiggling each rod, until i found one with slight play. I rolled in new bearings it fixed the sound for a month. The Crankshaft is generally junk from being hammered on.
goodoldjam 2 years ago
Funny you mention the 5vz. My Tacoma 5vz, has 220k miles and has a tiny tick along with a small exhaust manifold leak. Don't think the valve lash was ever ajusted on the Taco and Mk3. But, the Supra only has a 171k miles.
BoostedInline6 2 years ago