Ford AOD Transmission Assembly Part 2
Loading...
Uploader Comments (bah53)
All Comments (18)
-
Hi, Im putting a 1988 AOD in my 68 mustang...Does the electric plug have to be connected to anything? or is that just for overdrive? If yes, is it just 12v and a ground? Please let me know. thanks
-
"Bah" Has Kicked "Doug" from Expervillage in the bawwlz
-
@bah53 hey man, thanks alot! Might be having some more ?'s on some other clearances.
-
how long do u think it would take for an experienced mechanic to swap out a bad AOD and put a rebuilt in?
-
Hey, I've got an aod out of a 1988 mustang gt that has received a total rebuild but my out put shaft doesn't spin and when the gear selector is moved into the park position I don't hear the parking paw engage. Could the parking paw be stuck, and what type of end play should the input shaft and out put shaft have? Also when you put the needle bearing in the bottom before the out put shaft was dropped in is there a correct side that goes face down or is it universal?
9:31
Ford AOD Transmission Assembly Part 1by bah5320,216 views- 8:00
Ford AOD Transmission Dissasembly part 1: The Valve Bodyby bah5330,832 views
- 4:48
Ford AOD Transmission Oil Pump and Intermediate Piston Assemblyby bah538,145 views
- 1:44
Transmission front pump removal e4odby dhallock17,250 views
- 3:30
Service an automatic transmissionby CWTAFE38,116 views
- 0:40
Transmission pump rebuildby tuneyfish9916,283 views
- 10:55
Ford AOD Transmission Valve Body Disassembly part 2by bah537,064 views
- 2:36
Transmission rebuild pt 3by 4x4loonatic24,672 views
- 3:33
Transmission Animationby SaRaKuz24939,756 views
- 15:29
Complete 4R70W Transmission Assembly.by psygn0sis7,805 views
- 0:53
AOD transmission Finishedby 000302lf6,970 views
- 7:00
Complete 4R70W Transmission Subassembly.by psygn0sis10,136 views
- 42 videosbadass
- 11:05
Automatic Transmission Removalby richpin06a47,119 views
- 5:34
Automatic Transmission Torque Converter and Fluid Pumpby Aussie50125,874 views
- 4:50
automatic transmission rebuildby 1airforcebrat161,924 views
- 1:10
Ford E4OD Transmissionby ahubbard11713,169 views
- 9:46
Complete 4R70W Transmission Disassembly. (Part 1)by psygn0sis4,487 views
- 0:28
How a clutch works - internals of transmission and clutch assemblyby modernceo378,927 views
- 8:00
Ford C4 Transmission Disassembly Part 1of 8by More350Power13,587 views
What is spec for the depth?
BIgBlocksnHardRock 11 months ago
@BIgBlocksnHardRock 5.0L & 5.8L- (1.634-1.636 inch) 3.8L - (1.629-1.640 inches) These specs include the hieght of the tool which is .700 inches
bah53 11 months ago
should your output shaft move up and down and side to side?and what would be wrong your bearing and bushing or one or the other and how would you change them?
dupont4sure 1 year ago
@dupont4sure The output shaft itself might have some play in it if you take the yoke out but with the yoke in it should not have much wiggle to it. If it moves alot and is destroying your rear seal then it could be your extension housing bushing is worn.
bah53 1 year ago
@dupont4sure The output shaft itself might have some play in it if you take the yoke out but with the yoke in it should not have much wiggle to it. If it moves alot and is destroying your rear seal then it could be your extension housing bushing is worn.
bah53 1 year ago
Question....can you use the 2wd transmission and remove the extension housing and mate it to a transfer case?
thick2licknstick 1 year ago
@thick2licknstick I'm not sure, ive never had a 4X4 one to look at, but I bet it could probably be done.
bah53 1 year ago