Introduction to TAP Platinum Silicone
Loading...
Loading...
17,678
Loading...
Uploader Comments (tapplastics)
see all
All Comments (26)
-
muy bueno tu tutorial pero cuanto cuesta
-
nice tip
-
@mahnoorkiyani TAP Platinum Silicone can handle 500 degrees F.
-
@runcycleskixc Platinum Silicone is extremely safe. To quote the MSDS: "Hazardous components within the meaning of EEC directive 67/548 and corresponding classification:
none ." The product is non-hazardous, but has not been tested for FDA approval. It is not designed to be used on skin to make molds of body parts. We are not aware of any issues of skin contact with the cured material.
-
@bladerj Lots! I have done over 60 urethane castings (urethane is very hard on molds) and the mold is still good. Have not worn out a mold yet.
Loading...
7:19
Cast embedments in Clear Resinby tapplastics206,412 views- 6:34
How To Make A Latex Mold using TAP Premuim Liquid Latex Rubberby tapplastics34,544 views
- 9:19
Updated - Mold Making Casting Complex Parts w/ parting line)by freemanmfg82,509 views
- 5:27
How to make a simple Silicone Mold Part 1by tapplastics6,644 views
- 5:15
¿Cómo hacer un molde de dos partesby tapplastics79,397 views
- 3:31
Home Made Plasticby coolallizwell379,707 views
- 7:04
Updated - Simple Silicone Rubber Molds (no parting line)by freemanmfg106,982 views
- 9:13
Como hacer un molde de yeso (Practica 1 Procesos de Manufactura)by maximogucho17,629 views
- 36 videosFiberglass 101
- 5:26
Expanding Foam Tutorialby Mogrymillian124,648 views
- 3:55
How to Make Your First Mold and Cast with a Silicone Starter Kitby SmoothOnInc68,754 views
- 0:57
El desodorante de servicio sanitario mas barato del mundo.EcoDaisyby ecodaisy1,639,177 views
- 6:21
How to repair Gelcoat Part 2by tapplastics376,743 views
- 5:03
TAP Store Tourby tapplastics4,324 views
- 4:06
How to build a Mold Boxby tapplastics78,145 views
- 6:51
How to use Ultra-Glo and Ultra-Sealby tapplastics6,947 views
- 3:35
Injection Molding.wmvby Bobbyl00726,865 views
- 5:34
How to Polish and Repair Scratched Plasticby tapplastics202,862 views
- 5:19
How to cut Plastic Sheetby tapplastics160,940 views
- 3:08
How to bend Plasticby tapplastics182,552 views
- 9:38
Mold Making: 2 piece moldby brickintheyard95,517 views
Hi, I need to cast a figure out of platinum silicone. Which material is best to use as a mold? Also, is there a way to color the silicone (not only the surface, but the whole volume)?
Thank you!
dneproak 5 months ago
@dneproak Our Platinum Silicone can be cast in itself. Just wait 24 hours between making the mold and pouring the casting. Some pigments inhibit the cure of Platinum Silicone, others do not. Experimenting is the only way to find out which one will work.
tapplastics 2 months ago
Will it work with clear resin without any issues
MrElpee1205 5 months ago
@MrElpee1205 If you are referring to Clear Lite Casting Resin, yes, it works great with Platinum Silicone.
tapplastics 2 months ago
It was never stated whether or not you need to use a release agent....soooo do you need to use a release agent?
kittynred 1 year ago
@kittynred Platinum Silicone virtually never needs a release. However, it is always wise to test first for that rare exception. Some product can inhibit the cure and need to be sealed first.
tapplastics 6 months ago