ArdupilotMega 2 ESC startup problem and workaround
Loading...
Loading...
397
views
Loading...
Uploaded by marhar2 on Dec 28, 2011
"jump starting" the APM2 fixes a problem where ESCs are not initializing properly.
- 0 likes, 0 dislikes
-
- 2:00
1st Altitude hold using baro only - Arducopter APM2 (Purple)by nervrunna133 views
- 6:05
RC Plane Autopilotby bushido79825 views
- 0:55
ArduCopter Sensor drift at temperature changeby fnudelpapp46 views
- 4:11
ArduTri 2 FPV GoPro Vibe Mount - More Testingby mrdcramer446 views
- 1:22
U-2 UAV Projectby djwbfilms1,823 views
- 4:22
Help Fix My Turnigy ESC Problemby rlarue1601 views
- 2:39
Ardupilot UAV Assembly Presentationby keeganmann3,011 views
- 3:51
HobbyKing - Turnigy Plush 60Amp escby HobbykingLive18,015 views
- 2:46
Arducopterby cyborg251415 views
- 2:43
HobbyKing Turnigy ESC - Throttle Stick Programmingby RcFanBlog21,296 views
- 5:00
HobbyKing - Turnigy Trust 45A brushless escby HobbykingLive4,457 views
- 1:09
Quick clip of the Ardupilot Mega install 2010-08-07by trcostan2,041 views
- 2:18
ArduPilot Mega, Maiden Flightby terifilm628 views
- 2:15
ArduPilot Mega + Mikrokopter Frameby UAVmaker2,067 views
- 2:50
QUADRO APM v 2.0.46 Updateby rosiris3525 views
- 1:14
Turnigy ESC timing testby saxpg4,897 views
- 1:41
ArduCopter Loiterby bjowitt24 views
- 0:43
Mystery Pentium ESC **Problem and Solution** 40, 60 & 80 Ampby provideotube1,824 views
- 2:09
Arducopter Simple Modeby marhar2685 views
- 1:00
GAUI 500x w/GU-INS - GPS Position Hold - 2nd flightby gtrick90758 views
Looks like a seperate BEC would be the best solution so you can power up the board then apply power to the ESCs, Probably a better and more reliable setup with a seperate BEC instead of using the BECs in one of the ESCs anyway. Thanks for the post!
ramovan 1 month ago