#136 - HHO Games wrap-up 1

For latest news please visit my web site http://www.alt-nrg.org/ =================================================
First wrap up video of the HHO Games in Bradenton FL

Category:

Science & Technology

Tags:

• HHO
• Games
• Hydrogen
• fuel
• cell
• alternate
• energy
• conference
• geet
• smack
• Generator
• ICE
• I.C.E.
• electronics
• PWM

[XSRtiliry]

id have to say! ive been folling up on your shematics for the pwm, i got some plane from your friend from chemelec. and its going good, one question, the planes called for a 11volt 5 watt zender diode. i m using a 11volt 1 watt,,, what may happen or not happen by useing a lower watt zener?

[ZeroFossilFuel]

Chemelec's version of my design is unauthorized. The zener regulator works only for one fixed voltage input. The 7810 regulator permits a much wider input voltage range. This is why you only want the original. It's all in the details.

[RavenPrecept]

@bikr1975 I understand that if you hit resonant frequency of the cell you get loads more out.

[bikr1975]

think about this, ok, download some deep bass beats onto a mp3 player and play it through a 200-500watt subwoofer amp thats hooked directly to the hho generator. the power pulses womt overload the electrical system and could ultimately produce more hydrogen than all those time absorbing electrical gizmos?? right?? would this idea work for you?? this is the setup im currently working on. i dont want to post my gen setup yet. but soon enough ;)

[sodapop503]

he probably means that its a plastic from wal-mart.

[jousterusa]

You say this is a "Wal-Mart jar" but isn't it a plastic container? It looks like one in the picture.

[eaglet3d]

Hi Zero, You seem to be getting closer to a system that will save money and gasoline. I just have a couple of questions to help clarify the results. You mention 25 amp continuous on the trip down had produced about 1 liter per minute and achieved 33 mpg. What was the voltage (or better yet, the total watts per hour) consumed by the pwm? Also what is the average mpg of the same vehicle for similar driving conditions without using the cell?

Keep up the good work!

[flipster12000]

Hey zero, it's been a while since my last comment. Now you know exactly why I have always suggested putting the power terminals of a wet cell design on the bottom of the container beneath the water level at it's minimum level. I had one of those blow up in my face because of an arc(luckily I wasn't killed but it did hurt for about a week). Safety is always more important than efficiency. You of all people should know that but I have a feeling you do. Great work as always. Keep it up.

[ZeroFossilFuel]

Good eye. That's an original XTR-450. I have it running 2 ohm stereo @ 100WRMS/ch into 4 XTR-5 coincidental source drivers and 4 ohm bridged mono 200WRMS into an original XTR-10 sub with the ferro-fluid cooled voice coil in a 2.1 cu-ft ported box. Box and sub resonate at 24Hz. -3db @21Hz. Alpine 7800 series head. This system has been in three cars so far and will be in many more before it's retired. I may upgrade the head unit soon though. CDROM are touchy.

[llewgnal]

So now I know not to run my cell again until I make new "plates" for it.Plates I have were in old cell,two plates are almost touching... Good news is the dbl sided pcb has been shiped, I will be etching digitally controlled PWM,s soon, got 15 pin 90 deg plugs, will be installing them on new boards,11 new tracks. Maybe be talking to DPWM's soon. Gar

P.S. Sounds like you had a little adrinalin going ,eay?

HHO in tubing = det cord. Gota love HHO

[offgrid2010]

I missed the ustream live from the games but caught it several times on your trip down and up. Would it be possible for you to post that somewhere?

offgrid2010

BTW It was great meeting you both at the games.

[lostintimeBC]

did not have chance to see live feed

hope you will post vid of what went down

let now if any new ideas popped up while you

were there