XCEEDER 1200 RT - INCONEL BLISK HIGH SPEED MACHINING
Loading...
Loading...
4:09
Inconel Milling With Ceramic Insertsby 78rozey17,808 views- 3:49
High-Speed Aluminium Machiningby MCtooling56,519 views
- 0:31
OPEN MIND hyperMILL 5X CNC machining of Engine Head on OKK Machineby OpenmindhyperMILLuk39,042 views
- 6:44
HIGH SPEED MACHINING(REALLY HIGH!!!)by jamesu22926,529 views
- 1:17
5Axis High Speed Cutting DEMO : DAISHIN SEIKI CORPORATIONby dolce650i72,707 views
- 3:01
high speed precision milling 5 axis cnc Breton Ultrix impellerby TheCNCMillingmachine86,275 views
- 0:54
Incredible machine writes down the time!by luddite2299,623 views
- 2:01
High Speed Machining.AJX 4.0by damaunu93,111 views
- 3:02
Blisks machining on StarragHeckert five axis machiningcenter STC 800 from StarragHeckertby Starrag0113,752 views
- 0:41
Machining 718 Inconel at High Speedby PracticalMachinist22,199 views
- 3:19
Machining of an inconel turbine blade using ceramic tooling on a StarragHeckert LX 251by Starrag0111,123 views
- 2:23
Big Block Twin Turbo Chevy II - Fresh Start Upby twinturbo66211,978 views
- 1:11
Mori Seiki and Delcam: Pinch Millingby DelcamAMS65,821 views
- 3:45
mazak CTT5500T.wmvby TheAlemci1167,749 views
- 0:41
High Speed Machining - 718 Inconelby LoDown198988,905 views
- 4:13
Modelling-board / hard-board milling with Kolb StudioLine Mby KolbTechnology87,215 views
- 4:34
TurboZentrum Berlin zeigt einen Borg Warner EFR Turboladerby TurboZentrum33,260 views
- 1:11
Radial Air Engineby parkerdjte475,294 views
- 0:45
Machining Titanium, Titanium Machining, Horizontal Machining | Makino Titanium Machiningby MakinoMachineTools34,251 views
@Choice777 Good luck! Inconel is some pretty specialized stuff, for some very specific applications. You can't just melt it and pour it into a mold.
evbunke2 2 weeks ago
wouldn't it be easyer and faster to make a wax model and use the lost wax technique ?
Choice777 3 weeks ago
@ravikumarjp
On such long tooling, plunging is preferably used because the forces applied on the tool are upwards and using the strongest axial cut direction of any tool. Long reach tools like these would chatter trying to maintain the same mrr (material removal rate) cutting against the tool... Side cutting with any tool puts more forces vs. cutting down parallel with the spindle. Does this make sense to you? I can’t clearly see the tool to tell you which one is it.
jtjoser 2 months ago
Nice music
mentalabsence 4 months ago
@DanFrederiksen no we need better materials. both for the tool and especially the workpiece. If fanblades and attachment would withstand higher forces we wouldn't need a blisk in the first place. Not even for a Eurofighter (if I'm not mistaken, that's what the fan there is for.)
skaterfugater 6 months ago
what happens at 4:05?
myth446 8 months ago
have you americans stopped using old fasioned letter combinations for feedrate and stuff like that ????
speed=n
feedrate=Vf
feed=Fz
number of teeth=Z
cutting speed=Vc
TheBodvarg 9 months ago
it looks very nice but that's way too long for a single piece. we have to make better production techniques
DanFrederiksen 9 months ago
Regardless of being machined from a single piece of alloy, that piece must still be balanced using special balancing equipment.
apage251 10 months ago
being u have like a couple hundred hours in one part does that mean that piece cost like 100k plus?
mattprs3 11 months ago