Denso Starter Repair (Honda, Toyota, Chrysler etc.)

This is how to replace the solenoid contacts in a Denso starter motor. The link to the site I bought the parts from is below. It's easier to just call them up and tell them your car than use their parts finder online.

http://www.nationsautoelectric.com/wai-global-link.html

Category:

Autos & Vehicles

Tags:

• nippon
• denso
• starter
• motor
• solenoid
• repair
• fix
• honda
• toyota
• chrysler

[IRONTOSS]

thanks" for the video, helped me rebuild my starter on my 97' lexus, only cost me $27 for the set a far cry from $130 after starter market from kragen. it was a pain in the ass" one of those bolts was a bitch to remove but i did get it off took couple hours of my saturday away but hell i saved over $100! by doing it myself. thanks again!

[taitai907]

@boointd No.

[boointd]

@taitai907 did he replace the plunger too?

[boointd]

@rexblack88  you will want to look at the brass washer on the plunger and see if it shows signs of wear or pitting, It is just a good idea to replace if you are doing the contacts already.

[boointd]

$35??? you got ripped man! I live in a small town in oregon and I got the same exact parts from our small town parts store for $18.50. And I thought that was too much for these contacts. Hopefully others gain knowledge from this and avoid being scammed. :)

[taitai907]

My 4Runner occasionally has the "twist and click" starter issue. My dad replaced the contacts and that seemingly fixed the problem. However, very rarely, when the engine gets hot, I still get the issue. Any ideas?

[rexblack88]

Excellent good presentation.... keep it up.... but please tell when do we need to replace the plunger.... is it shows any sign before it goes dead

[ripsnorting13]

How do you know whether its your contacts or the whole motor? My car (camry 2002 4cyl) wont start. The battery tested good and the alternator is ok too. I do hear a humming sound from the firewall. Before it stopped starting the car sounded like it had trouble starting like kinda slow but started fine. Then suddenly it stopped. I cleaned to terminals with water and baking soda, no dice.

[rynkeby23]

keep them coming alex XD

[Doubledge007]

Great vid keepem coming.