Juni-Lee Exciter

Juni-Lee is 800 turns of #28 gauge wire connected per GBluer's instructions to form a simple oscillater and high voltage SEC or ( Spatial Energy Coherence ) device. It has one so-called active device, a 2N3055 transistor. The trigger coil is 20 turns of #20 wire, wound opposite sense to the other coil. This coil slides
back and forth on the bigger coil to help find resonant spots. There is a 3rd coil inside the big coil which seems to help it resonate better. This is a 12 inch piece of 3/8 inch steel stranded cable core wound with 3 layers of #20 magnet wire. When energized, it oscillates at about 575 Kilohertz, and there is high voltage all over the place. On the ends of the wires, the end of the steel cable, here and there at various places.
The current draw is about 200 ma, have to get more precise data. I burned out about 6 small transistors at first, the 2N3904 and 2N3906 in pairs, they smoked the room up good. The cat left. So I tried the 2N3055 in the TO0220 package and the damn thing actually worked.
Thanks to Jonnydavro, GBLuer, and Lidmotor for all their fine experiments and informative videos. They are doing great things, so please check them out.

I'm using GBluer's circuit, with minor mods, see the video here:

http://www.youtube.com/watch?v=vK9iYPu6UIk

Many thanks GBLuer!
Aloha

Category:

Science & Technology

Tags:

• SEC exciter
• oscillator
• radio
• energy device
• RLC circuit
• tesla coil
• tesla shuttle
• coupled coils

[jonnydavro]

Nice build Jack to your usual high standards.The centre coil is a nice idea and i can't wait to see what you do with this.Great work.Jonny.

[jackscholze]

johny, thanks for the note. I wanted to ask you about your "charger diodes" on your exciters, where you can charge caps/batteries off the smaller or higher current coil, or the big one or both. You are on to something very useful here.

I always wanted to employ a tesla coil in reverse sort of, to use the hi-volt /low currnent end to convert back to lo-volt/high current load again, and maybe get a boost from the ZPE energy.

Your clear videos and diagrams help me a lot. aloha

[JackassIns]

LoL Juni Lee is my name XP

[GBluer]

Nice video Jack.

It looks like your getting Great results.

[KSGUYNN]

Juni-Lee eh? Have a photo of the other Juni-Lee on the rock in the water. Your a genius my dear brother. Hey pretty soon you can join the SS club. Love you lots

[reeseht]

Good work Jack - you'll have to measure the V/I of that winding inside the tube and let us know.

Be interesting to see what it produced if the coil ran the full length of the tube & had more turns?

Jim