Intex Filter Pump Troubleshooting Guide
Loading...
Uploader Comments (coolinflatablesinc)
All Comments (17)
-
any ideas on why 3 of my jets wont turn off on my hot tub?
-
the water is not filtering out into the pool. I hear the pump on but no water is coming out. I tried releasing the air and taking the air out of the tubes what to do next?
-
Regarding ftlty's question about the pool being occupied when the pump is on, I understand how this may lessen the life span of the pump, but does it actually pose a danger to the occupants of the pool? I have a model 604 pump.
-
Yoo what if yu dont have those long tubes i only have one D;
-
I just bought the pool and after assembly and pump hook up the pump does not turn on . A filter was purchased and installed as well. Should the pump automatically turn on once plugged on?
-
@ernestdavis yes you can, just call inter customer service and tell them what your issue is, then they will send you a replacement
4:14
Intex 1000 gal/hr Filter Pump Model 637 Setup Instructionsby coolinflatablesinc5,108 views- 4:19
Funcionamento - Piscina Intexby AtacadistaOnLine31,723 views
- 1:26
2010 Intex 1000 GPH Filter Pump 56637by papoolwarehouse4,751 views
- 4:07
Intex 530 gal/hr Filter Pump Model 603 Setup Guideby coolinflatablesinc21,499 views
- 4:04
Intex Filter Pump Troubleshooting Instructionsby coolinflatablesinc1,955 views
- 4:41
Intex Easy Set Pool Setup Instructionsby coolinflatablesinc20,799 views
- 3:09
Intex Easy Set Filter pump instructionsby InterlineRetail3,268 views
- 3:56
Intex Round Metal Frame Pool Setup Instructionsby coolinflatablesinc27,778 views
- 1:49
Hacked Intex 18 with standard above ground skimmer, 1hp pump, and 110lb sand filterby macjake7212,229 views
- 0:31
Intex 15 x 42" easy set pool update #1by trucklover929,133 views
- 2:41
Intex Easy Set Pool Repair Patch Instructionsby coolinflatablesinc60,064 views
- 5:43
Intex 1500 gph Pool Filter Pump 56635E Set Up Video Instructionsby foxwebstores5,390 views
- 1:20
2010 Intex 530 GPH Filter Pump 58603by papoolwarehouse2,570 views
- 5:33
Intex rectangular ultra framepool #54482by JohanLaurens57,866 views
- 3:43
Troubleshooting & Maintenance Tips for Intex Poolsby SwimInPoolSupplies12,946 views
- 1:53
Como aspirar una piscina portatil INTEX Easy Setby heliotvsatelite48,599 views
- 5:44
Intex Oval Ellipse Frame Pool Setup Guideby coolinflatablesinc12,978 views
- 1:39
Intex pool pump filter modification part 1by LuigiMagilla3,781 views
- 3:38
Intex 530 gph Pool Filter Pump Model 58603E - How to - Set Up Filter Pump Instructionsby foxwebstores3,052 views
- 1:48
Intex Easy Set Pool Instructions - Part 1, Preparation - Outdoorleisuredirect.co.ukby OutdoorLeisureDirect19,309 views
what does 88 mean on filter pump?
duhonn20 8 months ago
@duhonn20 That means it is in startup mode. You will need to just hold the down key (left side) til it beeps, then hold the up key (right) til it beeps, then you will get 00. Then press the up arrow for the hours you want.
coolinflatablesinc 7 months ago
When I turn my pump off, water comes gushing out of the top...the air release valve doesn't screw down to anything...all I have is the top, the valve and ring. Can I order a functional replacement top that would allow me to turn off the pump?
ernestdavis 8 months ago
@ernestdavis If the problem persists you can reach Intex Customer Service @ 800-234-6839.
coolinflatablesinc 8 months ago