Stanley Meyers Replica producing hydrogen

This is a Meyers 7 tube hydrogen generator / Electrolyzer. I have another video with it hooked to a pulse generator. Both units are for sale.

Category:

Science & Technology

Tags:

• cell
• stainless
• hydrogen
• generator
• electrolyzer

[hydrogenauto]

It draws 6 amps at 12 Volts. Whatever that does for ya. I figured how much electricity it takes to put hydrogen to use would be a more important question.

[eloid777]

try High temperature electrolysis at 80-100c is more efficient economically than traditional room-temperature electrolysis because some of the energy is supplied as heat, which is cheaper than electricity, and because the electrolysis reaction is more efficient at higher temperatures. search Wikipedia

[hydrogenauto]

@eloid777 The only issue with heat is that it makes water boil and become a vapor in which it is difficult to make pure hydrogen from. Over heating is and issue we had to work with by using a pulse generator and not using too thick of material because it could not dissapate the heat quickly enough. I would be more than interested to see what results you have came up with. These are just our findings.

[catshazam]

what is the measured amount of hydrogen in liters per min

[hydrogenauto]

@catshazam I have another video which shows a bottle being filled. You can watch it. But really it isn't about how much you can produce per minute, the real key factor is if you can produce it without using lots of energy. This has been our goal since our group started over 7 years ago. Our answer was to not have the tubes surrounded by water and immediately capture the hydrogen into a tank before it gets attracted back to oxygen again. Feel free to check out our other videos and website.

[mindthoughts1974]

I'm very interested in buying your Meyers water fuel cell- how much are you selling each unit for? I'm also interested in the pulsed voltage generator system which permits the high volume production of Hydrogen and oxygen.

[hydrogenauto]

@mindthoughts1974 you can go to our website to get a better idea of what is real and what isn't. I suggest reading our hydrogen information page before purchasing anything. I only have the one unit and don't sell them on a regular basis. Our group mainly just likes to bring information to people but I would sell our large tube system since the newer ones we make are not surrounded by water. Visit drinking-water com.

[a2zhandi]

@ShinkoNet I think your heading in the right direction.

[a2zhandi]

@hydrogenauto FINALLY, a proper analogy of an efficient system NOT based on lpm.

Thanks

[ShinkoNet]

Hi HydrogenAuto, In a rare high quality television documentary DVD that I have,

Stanley Meyers has a similar setup as yourself, except that he was demonstrating mains power hookup (assume it is 115VAC) at approx. half an ampere of current running very cool and with far more hydrogen bubbles involved. I believe it could be optimised more by applying >40kV to get the water vapour/gas into an excited plasma state, thus driving the efficiency of the process even further.

[LOWEFERRARI]

The stanley fuel cell ? The water don't contact the electrodes in his cells.

[exolosars]

Real question is, do you get at least 101% Faraday? Stanley's wfc produced gas at 1700% Faraday rate. Please at least tell us how many Amps it draws at what Voltage.

[mindthoughts1974]

@minase0906 can you please send me a copy to my email address? or even to me here via a message?

[eloid777]

google

New Way To Split Water Into Hydrogen And Oxygen Developed