Solenoid Cutter Mechanism
Loading...
Loading...
8,123
Loading...
Link to this comment:
Share to:
Uploader Comments (portojbc)
see all
All Comments (4)
-
Hi Portojbc,
Why have you gone off using the solenoids?
-
Why not just use a single soleniod with a small magnet at the open and close positions?
Then you only need to power it to change state and only need one solenoid.
Loading...
- 2:08
Laminar Nozzle Cutting Test 2by portojbc3,134 views
- 1:04
Laminar Nozzle Cutter Test 1by portojbc10,147 views
- 0:41
New Cutter Test - Laminar Streamby magicmastera5,362 views
- 5:48
Laminar Jet Construction - Part 2by zacharysc10014,365 views
- 0:38
Waterjet Cutting Large Stainless Steel Gearsby WaterJetter08183,337 views
- 3:43
RGB Laminar Nozzle Testby magicmastera20,948 views
- 1:05
Controlling a solenoid with arduinoby jts3k13,460 views
- 0:32
Version 2.0 Laminar test 1by therons113,894 views
- 0:14
Laminar Roto-Cutterby therons116,631 views
- 0:21
Cutter Speed Testby magicmastera6,725 views
- 0:24
Direct-Acting Solenoid Valve Animationby solenoidvalves267,480 views
- 0:15
Write in the Waterby albertomoreau8,828 views
- 1:59
Time Fountainby teimco24,098 views
- 4:38
MAGICAL WATER FOUNTAINS WALI JETby philippeaerts23,993 views
- 1:11
Laminar Nozzle Test in my Gardenby magicmastera1,965 views
- 0:37
My First Laminar Flow Deviceby FonrusNoma17,466 views
- 1:22
AquaBurn-Live Fire Fountainby burnkarlburn15,918 views
- 0:45
Lighting Fade + Stepper Cutby portojbc10,805 views
- 2:12
Cutter for laminar Nozzle 2nd Attempt.flvby Khalid13491,129 views
If I understand your response, that wouldn't work (at least with these particular solenoids). These solenoids can only PULL. Usually there is a spring on them to return them to the original state which I removed.
If I use the solenoid with the spring and magnets to hold it open and closed then it would get stuck in the pull state because there wouldn't be another force to pull it from the magnets.
I don't think it is possible to use just one pull solenoid, unless you know something I don't.
portojbc 3 years ago
Nice job...what is your source and part numbers for the solenoids???
hdlrtc88 2 years ago
I have since gone away from the solenoids, but I got them from gold mine electronics part number G16036
portojbc 2 years ago