Milage Test Hydrogen Generator
Loading...
44,523
Uploader Comments (OriginalUncleNemo)
see all
All Comments (21)
-
More water?
-
top oil n more water helps 3yrs now
-
That will turn the generator and hydrogen OFF. The answer is to simply control the amp draw. Heat is perfectly fine and in fact, beneficial to the process (as I now know)
-
mount a thermostat control to the body ofthe hydrogen generator wire it into the supply voltage. it will become self regulating.
Loading...
Hey Uncle Nemo, I was told that a steady 20amp stream is available in a 20amp circuit like your wiper motor for example. But perhaps if what your talking about is bettering in assuring the amperage is constant than please let me what device youre using. Thanx for your impute and expertise. Marlon
dorfgnal 2 years ago
dorfgnal,
Youtube is blocking my replies to this comment. Please send me a message from my home page on youtube, so that I may reply properly.
Thanks
OriginalUncleNemo 2 years ago
Indepth report my man. Question though. Are you able to control the signal from all o2 sensors provided you have more than 1? And also where can I buy a flash arrestor from? And lastley, what is your main power source to your HHO generator?
Tahnx for your time and skills. Marlon
dorfgnal 2 years ago
Yes, the O2 sensors are now being controlled (after this video was made). You should build your own flash arrester, or go to myenergyinc on the net. My power source is my alternator. Keeping the amp draw down is important. I am working on an automatic PWM to control the amp draw. It will be ready in a few weeks for testing.
OriginalUncleNemo 2 years ago
Try a PWM with current limiter from zerofossilfuel (YouTube). You can buy one, or make one by yourself from his design, the design is for free. The cell will get less hot and it takes more time to get hot, and the current will not rise when the water gets warm because you can limit the current. good for continuous currents up to 75 Amp Dc and peak current up to 250 Amp and adjustable to zero Amp. You can also adjust frequency up to 10 KHz and adjust duty cycle. It works great.
Success, Rick
insAneTunA 3 years ago
Excellent info about the PWM. I do use one now. It does not improve production, but does make it easy to control the amp draw.
OriginalUncleNemo 3 years ago