Super Charged Propane S10

Loading...

Sign in or sign up now!
Alert icon
Upgrade to the latest Flash Player for improved playback performance. Upgrade now or more info.
7,541
Loading...
Alert icon
Sign in or sign up now!
Alert icon

Uploaded by on Jun 29, 2008

First roadtest

Category:

Autos & Vehicles

Tags:

License:

Standard YouTube License

  • likes, 5 dislikes

Link to this comment:

Share to:

Uploader Comments (Trompunitalphapropan)

  • Your right. I just blipped the throttle. This was the first 5 minute test with the new blower 3 years ago. it will burn both tires all the way through 2nd gear. Thanks for the post.

  • il give you a hint on your setup..i spent about 2 years on setting up my rx7 with eaton and propane...u need to run it as a draw through setup..gas research throttle body.then supercharger then motor and it will boost all the time,no need for blow off valve as the superchargers pump out too much air, but the factory eaton manifold has a bypass valve you can utilise to regain economy...check out my post BLOWN12A and you can see my setup..still working well

    Ray

  • I used to run a draw through setup with the bypass valve. I decided to run a blow through because I can safely run an intercooler. (m90s make more heat then a turbo). Also the blower can cool it self by moving air through, off boost. I run a large modified BOV so there is no/little pumping losses. Also the blowers runs with zero inlet restriction this way which help effiecency building boost. There is zero lag, even with a massive intercooler. I'll post some new vids this spring.

see all

All Comments (7)

Sign In or Sign Up now to post a comment!
  • something here is very wrong if your runing 12 psi on the V6 to make that weak of a burn out.

    unlike turbos a roots type blower make most of its power early, it makes a massive amount of torque in the low rpm band till it starts to drop off and hp takes over climbing up on the rpm power band, any dyno graph on a properly set up roots system will show this,

    roots type blower, intercooled, 12 psi, AF ratio set up right should be close to doubling the HP on that V6

  • basically move your gas research throttle body to where your air filter is and run your supercharger outlet pipe directly into your manifold but remove your intercooler first as its not needed and you wont want a backfire if you have it

  • were did you find the supercharger at ?

  • WoW, that is a sweet s10!

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more