How to Replace the Clutch and Primary Chain on a Royal Enfield Bullet Motorcycle

Here's how to replace the clutch and primary chain on a Royal Enfield Bullet motorcycle. See my Bullet at http://www.hoohoohoblin.com/ It was difficult to get everything to fit in a 10-minute video. My Royal Enfield Bullet 500 had some broken rollers on its primary chain, and the clutch was slipping, so I replaced both of them. It's easy to do and parts are cheap, so I'd recommend doing both if you're going to be doing work on one or the other. The whole job is easy and can be done in an afternoon if you have the right tools. I could have used a clutch hub puller, but my clutch hub was worn out and needed to be replaced, so I used a big caveman tool to remove it, which bent it out of shape. I replaced the clutch hub and basket with the Miracle Clutch from Nfieldgear, and I fitted it with 3 normal clutch springs and 3 heavy duty clutch springs. I was told by someone that I could fit 5 friction plates into the clutch, but I tried it and there was no room, so I went with 4, which is the standard setup for a Royal Enfield Bullet 500 classic motorcycle. If you need to repair your motorcycle's primary chain or clutch, I hope this video helps.
मोटरसाइकिल
オートバイ

Category:

Autos & Vehicles

Tags:

• Royale Enfield Motorcycle
• motorcycle
• Royal Enfield Bullet
• Royal Enfield Clutch Repair
• Royal Enfield primary chain
• मोटरसाइकिल
• オートバイ
• automobiles
• engine
• repair
• mod
• racing
• motor sports
• extreme driving
• custom
• cars
• vehicle
• installation
• consoles
• bike
• honda
• suzuki
• yamaha

[hack2it]

Thank's once again for giving me the info to help me know what to do w/my bullet. Your videos have been very helpful as well your reply's.

[hoohoohoblin]

@hack2it You're welcome. I'm really happy that so many people have found my Enfield videos.

[droid740]

This video helped chill out about opening up my bikes covers and removing pegs/shifters etc. Thanks for that! I was understandably a bit nervous...

[hoohoohoblin]

@droid740 You're welcome. I figured it would help people understand what is in there and how it works. I was really nervous the first time I took the clutch and primary chain out of a motorcycle.

[droid740]

did you forget to replace that ball bearing?

[hoohoohoblin]

@droid740 I remembered to put it back in. I can't remember if I included that in the video or not. I made this video back when there was a 10 minute limit on videos, so I had to really cut it down.

[hoohoohoblin]

@nixnikunj You're welcome. I'm glad you like the videos. The Enfield Bullet is really easy to work on.

[nixnikunj]

thank you so much... I ve even subscribed your ch! Always wanted to know the mechanism first, before owning my ride on bullet. Hope you will always keep these videos on flow. You are true rider. THANKS

[SREESAIKANNAN]

Hello,

 good evening sir' this is kannan, how are you doing.I'm fine here, I got it your information very fine,future eny information i keeb in tech with you.....!