Blade 400 Servo upgrade (part 1)
Loading...
Loading...
2,700
Loading...
Link to this comment:
Share to:
Uploader Comments (imusbbored76)
see all
All Comments (7)
-
you sound like a high australian surfer lolz nice vid
-
You have the most annoying voice...get a new one and then make more YouTube videos
Loading...
- 4:30
Blade 400 Servo upgrade (part 2)by imusbbored762,241 views
- 2:33
Blade 400 Modification Upgradesby tsantos012816,551 views
- 7:32
Blade 400 canopy mount upgradeby Nader7032,464 views
- 2:55
Blade 400 upgraded 10 21 09by Senegal011,403 views
- 5:12
Blade 400 SERVO issues!by WTFWTC715,455 views
- 0:36
Blade 400 Servo Problemby daveamber1002803 views
- 3:20
Blade 400 upgradesby HeliKrip35,958 views
- 1:54
Hitec HSG-5084 - Blade 400by zahnrosen744 views
- 6:46
Blade 400 3D gyro/tail servo setup Part 1by sokal1171,777 views
- 4:24
Blade 400 Servo upgade (part 3)by imusbbored76456 views
- 1:12
Paul's first Blade 400 flight with no training gear!by craig300838,964 views
- 2:51
blade 400 with sonic 3500kv motor and stock escby sokal1112,222 views
- 1:01
Hit in the back by my blade 400by baurwin113,957 views
- 4:12
Blade 400 Tail Rotor DS285 servo set up w stock gyro 10 20 09by Senegal013,016 views
- 2:39
Blade 400 Servo Help plzby imusbbored76805 views
- 1:57
Blade 400 Stuffed Aileron Servoby SeaComms13,115 views
- 2:28
Blade 400 TREE CRASH!! Stationary Flips/Rolls and Basic 3d Flyingby DijanRusta849 views
- 3:15
blade 400 with upgrades stall turns & tic toc attemptsby allcalifornia3,581 views
- 1:47
Blade 400 In my garage. It's snowing like crazy outside. Cant wait till spring!!!by FargoPool693 views
- 1:24
E-flite Blade 400 3D, Training and still tail/gyroby flyer15210,465 views
Nice. How long you been flying?
CrazyHeliDude 1 year ago
@CrazyHeliDude about a month in this vid. i got my first heli (blade 400) on jan 10th 2009
imusbbored76 1 year ago
i put HS-56 HB servos in mine and they poped in with no troubles, a litlle snug but they went in,
all you have to do is goto the swash mix menu in the dx6i or /7 menu and reverse the settings from + to - so if it was 75+ you need to change to 75- and same for pitch too or down will be up
almost had a fly away coz i forgot to change the pitch lol
apart from that you just need to level the swash with a hex key attached to the main shaft and the swivel it to make the arms the same, done!
puggster 2 years ago
cheers thanx for tips.
i worked it out eventually.
i cant believe it was a year ago lol.
imusbbored76 2 years ago
Popping the servos in and out can be a pain, I know.Especially the rear two.
elministere 3 years ago
i had to take the back off to get Eflite servos out . these ones slide right in
imusbbored76 3 years ago