390 Husqvarna

390XP with modified combustion chamber, duel port exhaust, mid-tuned (in between rev-tuned & torque-tuned) for power and chain speed. Shown sawing on a nearly cured madrone (hardwood). Using the same 32" bar, chain, and 7 tooth sprocket in the other videos. This saw has cut many millons of board feet.

Category:

Autos & Vehicles

Tags:

• timber
• felling
• falling
• redwood
• cutting
• oldgrowth
• hotsaws
• muffler
• mods
• 390
• Husqvarna
• hardwood

[treefaller390xpg]

thats my favorite saw to run is the 390xpg what are your thought on a 395

[hotsaws101]

I like them. It is toooooo bad they (Husky Engineers) did not spec the 394/395's with the 2100 crank configuration??? A couple pounds less with the same power. That would be an animal saw. Of course you can get a big bore kit and add ~ 6cc's > 99 total. Equal displacement just different ways of getting there. The 395 actually has a bigger rod bearing than a 394 which will handle the stress of the BB kit a little better in my humble opinion. Are your saws zipped?

[33volsfan]

hey love your videos! those huskys will really cut can you make my 460 stihl cut like those 390s?

[hotsaws101]

Thanks.

I can make a 460 / 046 run like a 372XPW > 76.5cc versus 75cc. The 390 is more comparable to a 660 / 066 in displacement and power, it will smoke a 460. Plus the crank case design and stroke is very good for making power on the 390.

If your are interested in a "zipped" saw let me know.

Thanks for watching!

[fredrik871223]

rpm please

[hotsaws101]

Here are the three; at idle 3300 +/-, short full throttle blast w/42" bar and chain out of the wood 15000 +/-, while the bar is buried in a 4' red fir butt log 12750 +/-.

Thanks for looking.

[maninaboysbody]

I can be witness to Jacks "zip jobs" He knows his sh&%!!! I now own "394 sleeper"check out vid!! got it off him through e-bay!!! Jack Thanx so much fer"ugly betty"Thats what I call her now!

[landymonster]

hey, i've got a 390xp. could you tell me how you managed to get so much power out of the saw? thanks

[stumpmaker72]

Saws sound and run great!! Like to talk to you about building a 660 BB for me.

[33volsfan]

I have seen your video of your big bore 460 it was very impressive also how much would a setup like that cost? and how reliable are they? I cut timber and want something that will last a long time please excuse my lack of knoledge i have always run stock saws

[MMFaller39]

That's pretty damn good almost 13k in the wood, nice mod work.

[mccormickchainsaw]

not bad