How do i fix flashed samsung instinct internet(metropcs)

HERE is the link to download qpst config
http://www.x-drivers.com/catalog/flash/mobile_phones/companies/qualcomm/model...

here is the link to download cdma workshop
http://www.cdma-ware.com/workshop.html

Remove your MicroSD card and plug the phone into your PC via USB cable then open QPST (QPST Configuration, then go to Start Clients and select Service Programming) and then read the phone.

Once you read the phone, go to the m.ip tab and change from mobile ip to simple ip. Then look at the first 2 user profiles under m.ip open each one up and change the Nai to 10DigitNumber@mymetropcs.com, for both standard and tethered...
remove any ip address that you find in these 2 profiles. and remove any other profiles except the first 2.
also make sure both of them say enabled.

Now go to ppp config tab...
look at the tabs that say um and an... under these 2 tabs,, the user id should be 10DigitNumber@mymetropcs.com tethered id should be the same,, password is metropcs in lowercase on both tabs, remove any dns ip address you find in either tab also. just make sure all ip address are blank.

once you are completed with this make sure you write to the phone and move on to the next step..

Step 2.

click on phone icon (on the phone)
click on the dialer..
enter ##3282#
click user name
click edit
enter your spc which should already be 000000 by now

Here are the settings:
User Name "10DigitNumber@mymetropcs.com"
SPI MN-HA "1234"
SPI MN-AAA "1234"
M Home Address "000.000.000.000"
Prim Ha Ip "255.255.255.255"
Sec Ha Ip "255.255.255.255"
Rev Tunneling "Off"
AAA Password "metropcs"
HA Password "metropcs"

click done and allow the phone to reboot...


Step 3.

Now do ##3282# again.. this time go to browser
click edit
enter spc
youll see gateway1 and gateway2, under both of these
you will see primary and secondary,,, set primary and secondary ip`s for both gateways to 010.223.002.004,, they will all be the same ip address,, and set the Port 3128and secure Port 0443 for all gatways to ,, hit done and reboot.

Comment Rate and Subscribe

Category:

Science & Technology

Tags:

• repair samsung
• instinct
• inteernet
• problem
• fix
• cdma
• flashed

[charlestopher]

ya i will probably make another video showing step by but idk if it will still work cuz i got a new phone now but i'll try within a couple weeks i'll make one comment rate and subscribe

[charlestopher]

i dont think you can do this on the droid it works quite well on quite afew samsung phones though

[lucaspaulable]

hey i had metro flah my phone and then did everything you told me in the vid..not working,please help

[almanzaralbert]

hi. i would iike to flash my samsung sph-m800 to metropcs. can you help me with tha?t. can you do a video? many peaple want to see a video doing so. thank you.

[Alexsis666]

where do i get drivers

[300grand456]

this dont work

[earauza7]

hey i need help can you help me please?

[jdmjunie07]

hey bro i did everythin on the video but it still hard can u gimme a call 404 781 3016 or make a video step by step

[fruitnubb]

i Have a instinct as well and I downloaded everything to my computer but I dont know what to do from there? If you could give me a call at 4045510388 and help me the rest of the way. Im Verne' Thanks

[essencew16]

I have revol wirless and would like to do this , do you know what revols password might be ?

[Jordans03]

Whats the Programming code.. When you get to step #2 it says to "write to phone before continuing" and the program ask for a Programming code in order to write......

do u have this?

[23Jawaun]

how do you download qpst config for free