hurst issue s197
Loading...
Uploader Comments (jennate03)
Top Comments
-
is there a way to fix the problem ????????wright back
2 years ago 4
-
did you fix it ?
All Comments (15)
-
Have you had problems with the bolt going from the Hurst to the tranny backing out?
-
in my opinion stock shifter is better, during racing i have missed third gear many times
-
Are you sure the 2 bolts just below the boot are tight? I found mine came loose and tightening them fixed the rattle. I read that this is a common problem...I'm gonna use some threadlock and hope that solves the issue.
-
when you guys do your install with this shifter use the factory bushings, they seem to fix this problem nicely
-
@vblad HELLLLO?????????
-
I worked some bearing grease into the joint on mine and it hasnt been clunky since then.... i think the stock grease is just weak and when it works its way out you really can feel the slack in the joint.
-
i got this problem 2! :(
-
Exact same issue when I installed mine.
- 2:14
S197 mustang GT Corsa exhaust with pypes catted Hby eslhockey92g15,731 views
- 6:47
DIY: Short Shifter Installby ProjectGarageOnline60,591 views
- 0:21
2011 Mustang GT 5.0L Steeda Shifter Testby LongStroke35137,259 views
- 1:49
STEEDA Tri-Ax Shifters - Feel the Difference!by steedaautosports9,058 views
- 1:31
Matt D's 5.0 4v S197 (10.87 @ 124mph) All Motorby Matauz7,680 views
- 0:49
Supercharged Mustang GT Accelerationby darkkshinobi57,118 views
- 0:35
GTO vs mach1 vs S197 GTby bharsen8,846 views
- 0:29
inside iroc z Hurst dual gate shifterby irocz28iroc38,373 views
- 7:26
2011 Mustang Barton Short Throw Shifter Installation Videoby 27dmoses10,107 views
- 0:28
Loose Hurst Shifter bolts 07 Mustang.by mind43162,208 views
- 1:22
S197 TURBOby TURBOGTRO6,227 views
- 0:25
s197 mustang GT vs lamborghini Gallardoby qkpz44,199 views
- 5:19
StreetLegalTV.com - S197 Mustang Mufflers Comparisonby StreetLegalTV2,360 views
- 2:21
Mustang GT MGW Shifterby Kanae19866,317 views
- 0:52
mustang gt top speed pullby black95gts5031,115 views
- 0:50
Dyno Run 2007 Mustang With Spintech Mufflersby cheese30213,308 views
- 0:28
Cammed S197 Mustang (NOT MINE)by bowlingbinder4387,381 views
- 1:34
2008 S197 GT MID MOUNTED FLOWMASTERby 08s1974,296 views
- 0:55
12 Sec S197 Mustang GT Gypsy Racingby MrJesusistheway771,330 views
- 0:53
BOOMTUBES on s197 mustang gt 2005 2006 2007 2008by Kara67camaro14,591 views
no i never had that issue
jennate03 3 years ago
no i used the bushings that came with the hurst. i dont have any issues with mine popping out of gear. maybe you installed the shifter backwards? its very easy to do and can cause issues like this.
jennate03 3 years ago
i took some bearing grease and worked it down into the joint and mine stopped. it will need it every six months or so if you want to keep it quiet but at least it worked.
jennate03 3 years ago