My lincoln SA-200 Pipeliner
Loading...
Uploader Comments (Flowfac21)
All Comments (6)
-
ivee learned,..if that magneto aint working right ,..niether is the engine
-
I recently upgradeing mine from the old R-57 idler to the new auto electronic idler. It's a much better system when working right and plus you can run a grinder off it meaning the machine powers up on it's own my old idler I had to use a pin to hold the throttle up when I wanted to grind which was a pain
-
it's suppose to do that, you should have a switch to either high idle or auto and when you switch it to auto when you strike and arc ir will automatically power up to either weld or to use a grinder and hwne the arc is broke it should idle down in about 15 seconds. The reason is so you have time to change welding rods before it idles back down. You can flip the switch to high idle so it will stay at high idle all the time.
-
its quiet!
3:29
PIPELINE: Ladies of 798by Gypsyatkins8,033 views- 2:48
Wireless Remote Hand Control Improves Pipeline Weldingby nielsmiller14,096 views
- 0:43
SA200 Pipeliner Runningby caseywellington3,061 views
- 8:53
lincoln sa 200by 11jsm10,611 views
- 1:38
Pipeliner / Red Face Lincoln SA200 For Saleby hobohilton1,199 views
- 1:01
Lincoln SA-200 Pipelinerby Blifamania3,400 views
- 2:57
SA 200 lincoln red face pipelinerby jeepsmorejeeps1,812 views
- 8:11
my welder a video requestby ils3602,321 views
- 2:00
Pipeliner LH-D Stick Electrodesby lincolnelectrictv7,393 views
- 1:42
Lincoln weldersby Freezer4275,139 views
- 4:47
classic 3 weldingby jeepsmorejeeps33,871 views
- 1:07
1958 Lincoln SA200 ShortHood http://www.sa200.orgby caseywellington17,846 views
- 4:07
LUPE SA250 WELDERby LoadedAR154,312 views
- 2:19
lincoln sa200 weldingby jrc99408833 views
- 2:55
FABTECH 2011: Pipeliner®by lincolnelectrictv508 views
- 1:40
1979 sa-200 readyby johnnybaja10001,163 views
- 0:27
In the ditchby TheTravelingWelder6,000 views
- 1:11
1958 Sa- 200 readyby johnnybaja10001,205 views
- 0:20
Lincoln SA 200 Cranking Aroundby caseywellington1,320 views
- 9:11
Lincoln welder , Weldanpower 225 AC/DCby TheToolReview1,387 views
Right now the machine revs up and down on its own on auto/idle can anyone tell me why its doin this..?
Flowfac21 1 year ago