imax b6.wmv
Uploader Comments (dayshaddow)
All Comments (84)
-
Can you tell me what current setting I should use when charging a NiCd or NiMh in both auto and manual? For instance, in Manual is the current setting the recommended charging rate or the capacity, so if a battery has a capacity of 1000mah and recommended charge rate of 100mah shoul the setting be 100mah (or 0.1A)? In Auto should the setting be the maximum charge rate, again 100mah as this is the recommended rate. Or should these figures be the capacity 1000mah (1A)?
-
@al420ful yeah I think so but only at a 5 amp charge rate which is the max for this unit. The B8 is the next step above this is you ever decide to go 8S
-
when you charging a lipo is the first setting the charge rate or capacity battery? For example I have a 2200mah battery I normally set it to 2.5 at 11.1 when charging. So I'm charging it at 2.5amps or is it the charger stopping when reaching 2500mah?
-
@bobbymalta73 can i charge 11.1V 5200MAH 20C RC AKKU Lipo battery 3S
-
Thanks for sharing mate!
-
@isoysa hi there and sorry for the delay..i now have a nimh pack which arrived 10mins ago :) and i can find peak sensativity options but havnt found the quick charging option??? perhaps there isnt an option for that or im blind..but then this is the first time using such packs on the charger
11.1V 5200MAH 20C RC AKKU Lipo battery 3S
al420ful 2 months ago
@al420ful @al420ful hi ya sorry for the delay in answering yes the imax will charge this battery.you can select upto 5.2 amps charge rate using the 10% charge rule but i would suggest charging at around 3 amp(its much kinder to the pack to slow charge it)the charger dosnt have a builtin cooling fan so when it comes to putting this pack from fully charged to storage v(3.8v per cell)it will heat up so i would suggesta real slow discharge to storage mode(1 amp perhaps and moniter)
dayshaddow 2 months ago
Hi dayshadow - I think the instruction video is very useful, please delete glenncol's post as I find his language offensive and uneccessary in that he use the 'f' word and I would like my kids to be able to view this video. He should be intelligent enough to be able to make a point without resorting to profanities (or maybe he isn't).
nepouka 9 months ago
@nepouka ok its done.thanks for watching :)
dayshaddow 9 months ago