Micro-servo Robot-arm part 3
Loading...
Loading...
11,675
Uploader Comments (kattejuice)
see all
All Comments (23)
-
how to on programming ploxx
-
can you please make a how-to video of micro controllers and programming the servos?
-
PERFECT
-
do you need extra external power supply for those servos?
-
can I use arduino uno for microcontroller ?
-
its not a usb port it a jack connector
-
Hey, what about using Arduino? Its way too easier than programming a PICAXE....
-
You should get someone to check your text for spelling errors, there are many. Good video tough!
-
you could have putted the brain in the base of the arm ;) just saying
Loading...
3:57
Micro Robot-Arm testby kattejuice11,929 views- 1:01
my first real robot!by kattejuice11,357 views
- 0:05
Micro-Robot Swarmby hizook434,364 views
- 6:54
How I made my RC cockroach-robot part 2by kattejuice8,560 views
- 4:11
Micro Robot-Gripperby kattejuice22,960 views
- 0:53
Biometal Self Control Robotby Bee1100257,661 views
- 0:34
Robot Arm Remote Control Interfaceby robots729,814 views
- 0:22
my robotic arm completedby janjaapschuurman53,174 views
- 5:22
walking robot test 1by kattejuice26,564 views
- 1:48
Home made robot arm - CS001 - by Zoltán Schoffhauzer (Hungary)by schoffhauzer26,923 views
- 0:40
Micro Servo - First Prototypeby angrymonk553,797 views
- 0:27
My robotic servo gripper first testby janjaapschuurman8,713 views
- 9:57
How to make a robot gripperby kattejuice14,543 views
- 0:25
Mystery 9g micro servo, modded for continous run.by Stigern5,532 views
- 1:33
Robot First Testby MechRC62,988 views
- 1:24
Smaller Micro Servo demoby angrymonk552,723 views
- 2:15
6 servo robot armby tyelr0084,583 views
- 1:15
RC-servo robot walkby moyane115,797 views
- 2:48
Custom Robot Arm and Gripper Demoby palmisano19,578 views
what's the song??
cetko13 2 years ago
8:53
kattejuice 2 years ago
hey men, I have a picaxe 08m, you think you can move 5 servos like yours? and could you upload the program that you used, your going to give me an idea of how to mine, thanks
joshmr21 2 years ago
well, my robot arm have 6 servos.. :)
and no... i dont think the 08m can control more then 1 maybe 2..
also.. the program i used is made for PICAXE 28x1 and will not work with 08m :(
im going to make a howto video with this.. :)
kattejuice 2 years ago
HUH? that was wired!!! i didnt remove your comment!!, winzCloud!
anyways.. i used acryllic plastic, and cutted it on a band-saw, then i grinded the edges with a dremel! :)
kattejuice 2 years ago
hey there great vid, is there any way we can have that code? or what program did you use? can you guide me on that? thanks a lot!!
chaulander 2 years ago
im going to make a video of it if/when i get enugh requests! :)
i use PICAXE programming-editor with my PICAXE 28x1
if you really want the code you must know ot is fine tuned to fit my servos..!!!
kattejuice 2 years ago