Newest Bedini Circuit - SSG Motor Part 2
Uploader Comments (atlantapad)
All Comments (27)
-
@tjamassey They 'can' produce more power but you need multiple coils around the spindle. This type of setup is mostly used to charge dead nonchargeable batteries by absorbing the fly-back power from the coil's field collapsing.
-
@atlantapad other people use more than 1 coil so 1 is for input known as trigger coil and the other(s) will be known as collectors will this help also witj use of capacitors at the very least may boost more power will it not?
-
check out my rotor - very similar to yours
mine does not make any noise
yours got a cool look - thanks for sharing
-
Nice set up, I like the fact that your work area is not a mess. For shooting your video's try a camcorder tripod. Have you tried any other type magnets other than the neo's?,there seems to be some confusion as to what type to use, from other peoples video's, it's not always clear.
-
The Modified SSG I built uses the discarded wheel from a high-end ten speed and with correct spacing used 12 magnets. I have the following gauges that I use to measure input and output temporary hook-up. Volts, Amps and Watts. I use an oscilloscope to see the output spike! That charges batteries. The slower it goes the BETTER it charges batteries. I have also restored, now three 12 volt batteries that were long past their useful life. Try it, it is awesome!
So you made an electric motor. I assume that the main coil fires when the sensor coil feels the magnet coming.
RavenPrecept 2 years ago
Correct.
atlantapad 1 year ago
So what is it supposed to do? You have an energy input in the form of a battery. Is it more efficient than ordinary motors or what? How long does it run for on a single 9 v battery?
tjamassey 3 years ago
The system was designed for a 12 v battery. If you used a lower voltage, then you may need to reconfigure the components. The circuit is supposed to create more energy than it uses. However, I have not observed this claim.
atlantapad 1 year ago
Very nice build indeed. You now need to work on your ratios for maximum output vs your input from the primary.
Pwordchernoir 3 years ago
I would like to hear more about your suggestion on the ratios. I imagine this would improve the amount of back emf current I collect to charge the charging battery.
atlantapad 1 year ago