How to program the old type BFT Mitto 2 and Mitto 4 to a BFT Rigel 5 control panel.

How to program the old type BFT Mitto 2 and Mitto 4 to a BFT Rigel 5 control panel.

This video shows how to program the old type BFT Mitto 2 and Mitto 4 electric gate transmitter to a BFT Rigel 5 control panel for your electric gates.

Firstly remove the cover from your control panel.
Your will see an Lcd screen in the top right hand corner
There are three buttons the top one is +, the middle is - and the bottom button is the select button.
To program the remote -
Press the bottom button once this will show BFT Rigel 5
Press the bottom button again and you are in the programming menu.
Press the middle button until you reach RADIO (if you go past this don't worry just press the top button till RADIO is displayed again.
Press the bottom button to select the radio menu then the display should read ADD
Press the bottom button to select ADD
Then the display should read HIDDEN BUTTON
Then on the remote transmitter press the button as shown (I find a paperclip works best)
The Lcd screen on the electric gate panel will the show RELEASE.
Remove the pressure from the button on the back of the remote.
The gate control panel should say DESIRED BUTTON
Press the button on the electric gate remote until the control panel says OK
Then press the top and middle buttons together until the control panel screen goes blank.
Press the programmed button on the electric gate remote and the gates should operate if not repeat the sequence.

For wooden and steel electric gates and automatic barrier installers in Leeds, Wakefield and Bradford in Yorkshire

Great novelty gift ideas at http://www.123giftstore.co.uk

Category:

Howto & Style

Tags:

• electric gate remotes
• automatic gate remotes
• BFT remotes
• BFT Rigel
• BFT electric gates
• BFT