Testing high pressuer washer and hose for snow gun/maker

I have made a test with a little piece of high pressure hose, which connects pressure washer hose and snow maker (Combo gun(no nozzles yet)). I use only one hoseclamp on each side of the hose, so the result wasnt good. If I would have two hoseclamps on the each side, the hose wouldn`t fall of the snow gun connector. I also had closed valve. If i would have open valve with nuc and two or three nozzles running, the water wouldn`t have so much pressure and with two hoseclamps the hose wouldn`t fall of the connector.

Category:

Science & Technology

Tags:

• Video033

[yamahaengine]

I can give you plan for this Combo gun. But you need also an air compressor, so the pressure washer is not enough to make snow. The air compressor has to be at least 6 CFM. Check out all my videos.

[pfun41]

i tried to patch a melted pressure washer hose with a barb and 2 hose clamps once. it blew apart too. the pressure is just too high for hose clamps.

[Raider014]

why does the CFM matter so much

[Raider014]

can u give me the plans for this and all i need is a pressure washer???? and the gun???