TEAC X-1000R/X2000R belt installation
Loading...
Loading...
6:19
Teac X-1000R Restorationby VintageTexas592,590 views- 7:40
Teac X-1000R Reel To Reel Tape Deck Demo Part 1by rick661224,365 views
- 1:48
TEAC X-1000R reel-to-reel recorderby Thouchins1,909 views
- 1:14
Teac X-2000R and X-1000R Reel to reel tape deck recorders searching for "0.00.00"by ppeterso222,004 views
- 1:07
TEAC X- 10Rby 2001SCENE3,694 views
- 3:03
Teac X-1000 Rby VintageTexas591,159 views
- 1:03
Teac X-1000R Demoby manorcom1,489 views
- 1:55
Teac X-1000RBL Capstan Belt Shift under Normal Operationby TRStuff359 views
- 0:39
teac reel to reelby WhatsItWorth19,752 views
- 5:21
Teac X-2000R reel-to-reel repeat functionby thereeler5,470 views
- 3:04
Teac X-1000R Reel To Reel: Danceby X2000R1,971 views
- 1:09
How To Thread A Tape On A Teac X-2000R Reel To Reelby X2000R14,128 views
- 10:10
Different decksby VintageTexas592,904 views
- 1:01
Teac X-1000RBL Demoby manorcom5,982 views
- 3:00
Teac X-2000R reel-to-reel playing Quadropheniaby thereeler4,153 views
- 3:20
Teac X 3 MKIIby VintageTexas593,017 views
- 0:42
X 1000R TEACby crossbowdeath672 views
- 3:50
Teac X-300 EEby VintageTexas592,841 views
- 3:31
TEAC X-1000R.MP4by smirshkahoven778 views
- 1:17
Teac a-3440 brake relay problem? somethings not working right?by aleaney1,086 views
Do you have a video of belt tightening for a TEAC X-10R?
BTW... what is that COOL music at 2:20. Sounds like a Hammond B3.
chenarch 11 months ago
I would like to thank you for this video! I have the service manual but my belt is like goo also and I was not sure how to route it, so as they say, a picture is worth a thousand words Thanks again!!!
cmcquade1 1 year ago
I totally agree with the previous poster, I just pulled the old belt out of my A3340 and it was completely "goo" leaving black sticky stuff on everything it touches both surfaces are as sticky as glue now and will need to be cleaned with solvent like lacquer thinner they are so gooped up.
definca 2 years ago
Thank you for the video but you should have cleaned the flywheels with some isopropyl alcohol prior to putting the new belt on. The old belt was visibly sticking as the result of it partially being melted and this left residue which should have been clean out.
sivle1973 3 years ago