Second CNC
Loading...
Loading...
3,685
0:45Sherline 5400 mini mill CNC spiralby gfixler42,640 views
Featured Video- 10:33Home made Gear cutting Hobs part4by Hobbynut241,425 views
- 0:56CNC Magic Screen Machineby ABlankJames5,215 views
- 0:59whoops sherline millby spunkmtb5,690 views
- 3:02Easy CNC Stepper Motor Driverby tomtechart475,303 views
- 4:33Easy to build Desktop CNC Millby tomtechart1,024,708 views
- 0:48First Sherline CNC Milled Pattern...by formwalt35,367 views
- 0:26Sherline millby tgreening28,988 views
- 1:13InfoTEC Group - CNC Router 3020Fby infotecgroup21,508 views
- 0:54Mach3 Millingby Diminutivemfg5,522 views
- 4:08CNC ROUTER 4-AXIS MACH3 TECHNO-ISEL 04by enytned131,431 views
- 3:22Sherline Mill CNC 4 axis machiningby rdgtm70,943 views
- 0:14Testing Sherline CNC conversionby hobbymechatronics2,329 views
- 0:27Linistepper first tryby Sicon762,665 views
- 1:57CNC PCB Routingby ivan1823123113,004 views
- 1:48EMC2 AXISby uran238uran238392 views
- 0:40robot controlled by emc2 (linuxcnc)by alexjoni27,546 views
- 0:53Flycutting Delrin on a Sherline 5400 CNC Mini Millby gfixler14,979 views
- 0:12Milling miniature pulley mold.by formwalt39,816 views
- 1:09Testing "BMP2CNC" program on CNC Sherline millby vlmarshall2,661 views
I wonder what mode those Linistepper are running in? The motors sound a bit rough, so I'm guessing they are in full or half step... Have you tried them with one of the microstepping modes?
JamesMichaelNewton 1 year ago
@JamesMichaelNewton Your correct that the selected mode is half-step.
Since I changed the current resistors, I would need to change them also for the microstepping modes and I really didn't think there was any justification for this since the resolution is good enough for me and I don't seem to suffer from resonance.
NekMech 1 year ago
This is just what I need :D What interface is used between PC parallel port and LiniStepper drivers??? Some link to shematic, pls? And what for 4th linistepper is being used ??? 1-x, 2nd-y and 3rd for pencil up/down, 4th ? ( I probably don't need it for PCB drilling ) what PSU is used ? Thanks :)
milek021 1 year ago
Interface is a CNC4PC board and a small circuit used to enable low power mode.
4th axis is rotary table on mill.
NekMech 1 year ago
Indeed they are.
NekMech 2 years ago