old zenbot mini cnc router www.zenbotcnc.com
Loading...
Loading...
37,256
Loading...
2:11
Desktop CNC routerby smyra0ozgun37,087 views- 1:17
Mini CNCby 35lexluther18,980 views
- 0:43
Mini CNC X/Y table from CD Drives 1by sparktronics79,474 views
- 2:42
Thermwood - 5 Axis CNC Router at John Cox's Creature Workshopby ThermwoodCNC442,084 views
- 0:23
Mini Router CNC 20 x 15 cmby Rautroncom85,864 views
- 9:14
SCM Record production_wood 2by SCMGroupBelgium40,012 views
- 6:02
Mini Cnc Router Engraver By Alexby 35lexluther36,282 views
- 57 videosNew Cheap CNC Machines
- 4:31
Mini DIY CNC Machine 1st Real Cut - Neo7CNC.comby radioshack734,772 views
- 1:21
CNC Homemade router, milling by Dremel graving tool PART 4by engineerus022,644 views
- 1:12
CNC Router cutting the Wood Dragon mad fron Harding wood from Thailand.by Theppuen507,804 views
- 0:45
CNC engraving flower of door 木工雕刻機工藝by chaostec101,635 views
- 0:27
Zenbot machining sparkfun case fixtureby madeinoz671,964 views
- 7:34
CNC ROUTER 5' x 10'by roonster7197,460 views
- 1:24
Zenbot mini cnc router www.zenbotcnc.comby zenbotcnc40,605 views
- 2:22
Meccano Milling Machineby atheberge40,022 views
- 1:10
CNC Cutting a Faceby leehound1,650,149 views
- 1:06
Scott's Completely Homemade CNC Machineby mx5man2005278,145 views
- 5:00
Wasp & Dremel Concrete Engraving Video—ConcreteNetwork.comby ConcreteToolsCNTV22,877 views
- 0:45
Homemade CNC Router failureby summetj4,010 views
- 2:36
Home Brew CNC Router - First testby tybrenis6,058 views
I've seen many of these types of machines, big and small. All the descriptions talk about the machine itself; what about the computer program used to run the machine. Is the drafting program on a PC? If so, what is the medium used to transfer it to the CNC machine? Or what other computer is used?
JemmetGK 3 years ago
The machine is controlled with a pc running a program called mach-3. You can also control the machine with an open-source software called EMC2. The design work can be done in a number of CAD programs. Some good hobby CAD/CAM programs are made by Vectric. With the Vectric softwares, you can do your design work, and your machine toolpaths. Then you just save the toolpath as a g-code and open it up in mach-3 to run it.
zenbotcnc 3 years ago
Thanks for the response. How much is it selling for and how big of a piece can it produce?
prairiepeger 4 years ago
The machine has 6" x 8" x 2.75" travels. The cost for the new model is $550 for the machine with the stepper motors. The new model is driven by kevlar reinforced urethane timing belts and has 800 inches per minute rapids. It runs on preloaded bearings so there is no slop.
zenbotcnc 4 years ago
Is this item still available through ebay?
prairiepeger 4 years ago
This model is being replaced with a newer, much improved model which is going into production this week and should be available the following week.
zenbotcnc 4 years ago