PC Overclocking Problem.mp4

Recently I upgrade my pc purchase E6300 and ASUS P5QLD-PRO and OC to 4.2ghz (400x10.5) 1600fsb But problem is the PC after pressing power button
ON
OFF
after 3,4 sec automatic ON
even on 1333fsb 3.6ghz same problem . I take out the GPU 4850 but still same problem persists, so problem is not Corsair CX400 PSU but some other which i am not being able to makeout. but pc was run fine after start and without overclocking pc normally ON
when i overclock my pc then pc not start normally
plz kindly help us.

Category:

Science & Technology

Tags:

• PC
• Overclocking
• Problem

[MrChriss1337]

Not serious? OC to 4,2Ghz with Intel Standard Cooler. Haha.

[bggamerman]

May be e bios problem i cant think of anything else.If it was mosfets they would fail you when you are gaming.

[survivor030406]

also dump the asus and get a Gigabyte P45 mobo

[survivor030406]

from pcworld " between 156 watts while idle to 241 watts under load with the HD 4850" 400W PSU needs upgrading, and get a better CPU cooler.

[Mateuszhock]

its psu

[RicardoLima1992]

i had a problem liek that once!

i turned on, he turned off right away, and 2 secs later he turned back on again.

it was the PSU, it just couldnt handle the hardware (not enough power) a week later the PSU died.

hope i helped in anything :\

[AnimationXXTrue]

reduce the clock by the dissipator serie is reality bad for the processor.

[manzar110]

Its normal, dont worry, after OC and voltage changes this happens, its totally normal, but main thing is that your PC should be stable(it doesnt hang or bluescreens or restarts)