Supercharged Duratec Dyno Run
Loading...
Loading...
3,758
Loading...
Uploader Comments (theflakmonkey)
see all
All Comments (11)
-
I have this motor and make 230whp 214lbft on the stock motor, stock intake manifold, at 11psi turbocharged. My friend made 355whp 250lbft on the stock motor with a bigger turbo.
-
@theflakmonkey ok great will check it out.
Loading...
1:25
Caterham Drifting at the Autosport Show 2010by illusions200618,256 views- 3:51
Duratec 2.5L Race Engine Dyno Sessionby specialistcomponents1,886 views
- 0:50
Supercharged duratec 4by theflakmonkey4,020 views
- 2:34
First Driveby daedalus705,848 views
- 1:08
Westfield SEiW Zetec 2.0 with Jackson Racing superchargerby AlfaSwede2,842 views
- 0:10
Mustang Boss 302 Coyote engine dyno test - Tuned By Shane Tby TunedbyShaneT10,660 views
- 2:09
Cosworth 2.3L Engine Testby cosworthusapower6,636 views
- 0:54
R1 Turbo Locost on Rolling Road at Newarkby theflakmonkey3,465 views
- 0:22
Escort Mk2 2.3 Duratec poweredby kevmk23,681 views
- 0:38
supercharger duratec 0.45barby maxim771975438 views
- 0:20
Supercharged duratec new camsby theflakmonkey1,464 views
- 0:48
dean 106 turbo mapping run ATSPEEDby colin5288,216 views
- 8:05
Forced Induction - Supercharger vs. Turbo Chargerby weirdvids345929,862 views
- 3:41
Ford Duratec Dyno Runby bhempstead3,442 views
- 1:20
CRX K20A Rotrex 340WHP April 11 2010 Autocross Ft Devens MA SCCAby crxkswap2,819 views
- 1:40
lycoming t53 turbine engineby adambrat13,884 views
- 1:06
mk2 rallye r32 rotrex 4motionby bivw8,005 views
- 2:48
HKT GTS Super Seven 380 PS 1,8t Turboby ngdragracing13,685 views
- 1:22
Duratec 2.3L First Startby StretchXI2,562 views
- 0:47
Atspeed Racing Rolling Road Chevron B15 Formula 3by colin528963 views
Really interesting project. Did you have to make many changes to the duratec's bottom half (con rods etc.) to get that sort of power out of it? sorry if it's a silly question.. just starting a kit project and learning from scratch!
jimmytoolbox 10 months ago
@jimmytoolbox
Forged rods and 10:1 pistons. I changed the cams in the end as well and it made 291bhp and 240lbft @6300rpm at the flywheel with 9psi of boost
theflakmonkey 9 months ago
@jimmytoolbox Just forged rods and pistons. I ended up fitting Raceline 210 spec cams as well and it made 291bhp and 240lbft at the flywheel. Great fun,....
theflakmonkey 9 months ago
Ah ok cool, yea this is why I want to get a blower on my honda lump, to fatten out the torque curve. Bet it pulls well out of tight corners, autocross monster.
R411Y3 1 year ago
@R411Y3
Having trouble linking to a printout of the rolling road plot, if you got to my website (customworkshop .co.uk) and click on projects > kit car then the printout is there.
Compare that to a 290bhp NA duratec and you'll see the difference.
theflakmonkey 1 year ago
Can I ask a stupid question? But why go supercharged when a Duratec could make 95% of that power NA? Unless this is just the start. Looks like it's had some money, love and effort put into it with roller bodies etc, would have expected to see 300hp like the blown K20s.
Hope I dont come across like the usual YT idiot, just want to know as looking at a rotrex blower for my elise.
R411Y3 1 year ago
@R411Y3
Beacuse its far more driveable more low down torque and power. I swapped the cams and dyno'd it again and it made 291bhp and 240lbft @ 6300rpm with only 9 psi of boost. With 350bhp pretty easily achievable with more boost.
The guy who did the second rolling road session has a westy with a 290bhp NA duratec. His comments to me were that mine made more than double the torque and power at 3000rpm than his did.
theflakmonkey 1 year ago