How To Start A Basic Glow Engine
Loading...
Uploader Comments (aerialboy55)
All Comments (18)
-
Wow, i think that plane has cancer.
-
You don't risk breaking the con rod with turning it over so long with an electric starter and finger on the muffler as you show. Then your next mistake is not discussing initial tuning, which in fact you aren't doing yourself. This engine should start with 1-2 flips of the prop. Improper use of an electric starter that long is no substitute for poor tuning. Adjust your idle screw, which you never mentioned. or show.
-
very very old plane
-
1) put throttle all the way up
2)put your finger over carb.
3)spin the prop with 12v starter.
4)after it's primed take your finger off and put it to 5% throttle. (the carb being just bearly open
5)put glow igniter on for about 10 seconds.
6)take it off.
7)spin with 12v starter
8)while doing this just tap the glow stick onto the glow plug and the engine will VROOM right up. do this to start it again in case it stopped.
6:34
How to Start a Glow Engine on a RC Planeby coolvid67913,475 views- 7:39
How to start an RC plane and what you needby atvmaster28110,323 views
- 9:19
RC Basics- How to start a Glow Engine Part1by aerialboy556,464 views
- 10:01
how to build an ARF PART 2 rc airplane almost ready to fly 40 60 90 size trainer all the basicsby hacker86753095,895 views
- 6:07
OS FS-52 Four Stroke RC Glow Engine Reassembly Part 2by rcdieselrc43,330 views
- 10:39
Antique Cox Control Line Plane's History and flights by NightFlyyer.by NightFlyyer96,087 views
- 4:21
O.S 46 AX 7.5cc nitro engineby 9unuunu14,380 views
- 3:33
Hobbico SuperStar .40 Trainer Flying in Close Quartersby bjrowserfly3,160 views
- 4:25
20 ft.Giant Scale Caudron Racer 80 % scale!by busvanman1,584,769 views
- 4:40
Preparing your Nitro Engine for its first starting- Pt.1, Preparation stepsby jthornley129,898 views
- 10 videosHow to start and use a nitro engine
- 6:39
Air Hogs Jet Set Reveiwby duderunescape132,701 views
- 5:43
RC nitro engine Stock Needle Settings- Vid 2 How to Tune Seriesby Squirrelod126,123 views
- 5:06
worlds largest model rc plane take off and landingby rcpowerplanes139,233 views
- 4:34
RC Mustang P51 Part2 Maiden Flight and Crashby arcanumskin4,290 views
- 5:10
How to Fly a 4 Channel RC Planeby alishanmao246,417 views
- 9:18
how to build an ARF PART 3 rc airplane almost ready to fly 40 60 90 size trainer all the basicsby hacker867530915,895 views
- 13:17
RC nitro Engine tuning theory - Vid 1 How to Tune Seriesby Squirrelod80,308 views
- 4:56
The Whittaker Firefly 46 Glow Engineby Shedpix5,953 views
- 2:47
Starting MLD-28 gas engineby cermarkadmin9,867 views
Goodness, it's 90% fussing with the engine and 10% flying.
CarlosMerighe 1 year ago
@CarlosMerighe, Isn't always 10% flying? haha.
aerialboy55 1 year ago
, dont leave your antena of your radio unspread...
You are destoying the module of the system...
believe me
Bucker131Jungmann 1 year ago
thanks i guess? umm how?
aerialboy55 1 year ago
hey, i would not use APC props - they do cut very well
PS - your plane is falling appart
Bucker131Jungmann 1 year ago
its a very old plane, it was given to me from an older guy at the field who died of cancer, i cant fly it now the wing broke and i dont know the name of the plane, do you?
aerialboy55 1 year ago